Hello,
> > cardctl reports an empty socket 0 and a 3.3V 16bit PC-card
> > function0:[ready]
> > in socket 1. The card is recognised correctly as CF+ LPE [...],
> > manufacturer-ID 0x0104, 0x0075, function is 6 (network),
> > still no eth0. I
> > think now that I miss a certain step to bring this thing
> > up, anyway, can't access it via ifconfig.
> Ok, those are the correct IDs. Can you check that you have
> the following entry in your /etc/pcmcia/config file please?
> card "Socket LP-E CF+ Ethernet"
> manfid 0x0104, 0x0075
> bind "pcnet_cs"
Yupp, the entry is present.
--
Thilo A. Fromm, Hardware Development
DResearch Digital Media Systems GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 (30) 515932-221 mailto:[EMAIL PROTECTED]
Fax: +49 (30) 515932-299 http://www.dresearch.de
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
