I need to get the Neposet onboard ethernet up. From the diary entry,
I believe this should be working as of June. However, having built
the kernel and modules required, attempting to ifconfig to any IP
address just gives errors. This is what I have:
I have a 2.4.7-rmk3-np1 kernel. I have enabled 10/100 Mbit networking
and the SMC and smc9194 in my config. I have also enabled PCMCIA
networking. I've found that the Socket card runs fine if I load it into
a PCMCIA sleeve and use it in the Neponset PCMCIA socket.
However, for my application I need the PCMCIA slots for something else.
The onboard ethernet does not seem to come up - is there something
else I must do in addition to build the kernel and modules correctly?
Any /etc files need to be updated? What about ethernet device address -
does that need to be programmed (how?).
Thanks
Tim
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
