EDB7111-2 RevB
I'm running at the 18MHz setting.
We know it's end-of-lifed, but Cirrus Logic has thousands of chips still
which we can obtain. So, for our purposes it should be ok as long as we
can get it going.
So do you know of anything else that could cause a problem reading the
CIS?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Jon
McClintock
Sent: Monday, September 17, 2001 11:19 AM
To: Trenton D. Adams
Cc: 'armlinux Discussion'
Subject: Re: CL-PS6700 PCMCIA controller driver
On Mon, Sep 17, 2001 at 09:49:41AM -0600, Trenton D. Adams wrote:
> Russel replied to my private email. Apparently it's not complete
yet.
> Anyone else work with this controller?
What platform are you using? The CL-PS6700 was used on several of Cirrus
Logic's
EP7x1x evaluation boards, with several caveats. First off, to use it,
the
processor must be clocked to the lowest speed (13 or 18MHz). Secondly,
be
aware that the CL-PS6700 has been end-of-lifed by Cirrus Logic; do not,
I
repeat, do not, design it into any new products.
-Jon
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
