Mohamoud xaji_gaid wrote:
> Hello:
>
> I'm a new user of the IQ80310 and hoping to get help from experience users
> of this board.
>
> I have encountered problems while trying to flash the Redboot monitor with
> FRU intel utility. The IQ80310 is inserted in one of the slots of the host
> machine running WINNT. I created a boot disk and added the redboot binary
> image. When I rebooted my PC the FRU utility started running from the drive
> a: but it is giving me an error: "CAN"T FIND AN IOP AT RESET MODE". It seems
> that it can't detect the IQ80310 on the PCI slot. Any suggestions would be
> appreciated.
You didn't mention it, but are you booting the 'DOS' OS, I thought FRU only
worked under DOS. In my setup, I use the WinNT OS to transfer data
in via FTP, the reboot into DOS to run the FRU utility.
Mark Salter has mentioned the switch settings that are needed for the
board to be accessed by the FRU program.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
