Which pcmcia package is the best one to use/is more up to date ? I have ported the controller on my inhand Elf board using the in kernel one + some work Simon Glass did a while back. The controller seems to work fine as cardctl and cardmgr all play nicely, show the correct output and actually attempt to load the moules for the cards ( orinoco silver and xircom 10/100 card). The problem I am having is that the xircom come up fine, and I can set an address for eth0, but the transmits all timeout. The orinoco wont come up at all, instead it gives me this message: hermes @ 0xf6000000: "\"Reset completed in 1 iterations\\n\", CMD_INIT_TIMEOUT - k"<3>hermes @ 0xf6000000: Timeout waiting for card to reset (reg=0x0001)! eth0: failed to reset hardware (err = -110)
What can I do to try and findout what is going on? I am really in need of getting this working this month :-) Thanks a ton ahead of time, Nic -- Nicholas Henke Undergraduate - Engineerring 2002 -- Senior Architect and Developer Liniac Project - University of Pennsylvania http://clubmask.sourceforge.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There's nothing like good food, good beer, and a bad girl. _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
