Hi all, I just installed linux 2.4.17-rmk5 on my cdb89712 board and everything runs great :-) . There is one thing though, I found that there is a patch for a 2.4.16-rmk2 (written by Ray Lehtiniemi) that enables ethernet support (for cs89712) for 2.4.16 kernels. I couldn't find ethernet support in the config of the kernel that I run now. If I choose Network device support in the 'make xconfig menu' then the cs89x0 driver selection is dimmed so I can't select it. Does this mean that I need a patch to get ethernet working or do I need to do some other changes in my config. If I need a patch, could I use the 2.4.16-rmk2-rayl1 patch for 2.4.17-rmk5 as well ??
I could also switch back to a 2.4.16-rmk2 kernel but I am afraid that this messes up libraries (libc ) that I compiled using the kernel headers of 2.4.17-rmk5 Any help is welcome, Thanks Lambert Duijst _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm http://www.arm.linux.org.uk/armlinux/mailinglists.php Please visit the above addresses for information on this list.
