On Sun, 2002-04-07 at 23:16, Ben Greear wrote: > I have been trying to get a later version of the kernel > to boot on my CerfCube. (I have installed 2.4.9 and the > Familiar Linux distribution.) > > I cross-compiled a 2.4.18 kernel patched with 2.4.18-rmk4 patch. > > The build was clean, but the kernel hangs after de-compressing. > I used the kernel.config recommended by Intrinsyc (modified slightly). > (It's attached if that helps...) > > After flashing the zImage file onto the cube, I see this: > > IBoot> boot > Uncompressing Linux................................................... done, booting >the kernel. >
try these: CONFIG_VT_CONSOLE CONFIG_SERIAL_SA1100 CONFIG_SERIAL_SA1100_CONSOLE CONFIG_SA1100_DEFAULT_BAUDRATE _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm http://www.arm.linux.org.uk/armlinux/mailinglists.php Please visit the above addresses for information on this list.
