Hi, I am using linux-2.4.6 with patch-2.4.6-rmk1.gz and the linux patch from Ray (followed the instructions on Roland Seuhs web page). Thanks to the hermit patch from Jeroen Roosen the TE28F320C3 flash on my CDB89712 compatible board are unlocked and the kernel and ramdisk are installed ok. Now I am trying to make a flash file system, and I compiled the tools from mtd, I needed the unlock program to unlock the mtd character device (I have /dev/mtd0-3). Only unlock of character device mtd0 worked, here is the screen dump of proc/mtd: # more /proc/mtd dev: size erasesize name mtd0: 00800000 00020000 "flash" mtd1: 0000c000 00000010 "SRAM" mtd2: 00800000 00020000 "Physically mapped flash"
My question is how can I make use of mtd3 to store a file system, how can I specify where in the flash memory this partition will be? Any information on this is greatly appreciated. Thanks, Marius Tannum [EMAIL PROTECTED] Marius Tannum Powec AS Drammen, Norway Phone: (+47) 32 26 75 07 E-mail: [EMAIL PROTECTED] _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm http://www.arm.linux.org.uk/armlinux/mailinglists.php Please visit the above addresses for information on this list.
