Hi everyone,
I am not sure if this is the right mailinglist for my problem, I am using an Intel Assabet Board, and kernel 2.4.18-rmk5. I modified familiar 0.5 and installed qpe 1.4.0 on it, but I cant get the Touchscreen to work right. I used the 2.4.9-ac10-rmk2-np1 before and had everything running just fine, qpe worked, touchscreen worked and frontlight too. But now since changes to the devices were made, I cant get the touchscreen to work anymore. In /dev I made a directory touchscreen with a character device ucb1x00 major 10 minor 14. I also linked the h3600_ts to that device, and the h3600_tsraw to h3600_ts. I think this setup should be right. doing a cat /proc/devices I found that misc is to have a major 10, and doing a cat /proc/misc I found the touchscreen driver /touchscreen/ucb1x00 with a minor 14. So I guess mknod /dev/touchscreen/ucb1x00 c 10 14 should work. Can anyone tell me where my mistake could be? Regards, Jens oooOOOooooOOOOOooooooOOOOOOOOOooooooOOOOOooooOOOooo Von: Jens Mischer E-Mail: [EMAIL PROTECTED] Tel.: 02871 - 91- 2931 _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm http://www.arm.linux.org.uk/armlinux/mailinglists.php Please visit the above addresses for information on this list.
