In article <[EMAIL PROTECTED]>,
Russell King - ARM Linux Admin <[EMAIL PROTECTED]> wrote:
> nik writes:
> > I am having problems with !Partman. Using version 1.11, when I click
> > 'new' on the menu, nothing happens. Using version 1.13, when I try to
> > create a new partion an error box appears saying '% may have gone wrong.
> > Click continue to try to resume or Quit to stop %0'
> This sounds like there's something wrong with MessageTrans - it shouldn't
> leave the messages with '%' signs in them.
> > Using version 1.05, I am able to create the partitions perfectly, but
> > when I boot into Linux, it doesn't see them (ie it can see hda, but
> > doesn't mention hda1,hda2 etc)
> Can you try the latest ALPHA partition manager?
Trying partman-1/13-alpha13-dev2/arc, is this the latest?
It works (sort of). I'm sure that I tried this one before and it didn't work.
Anyway, I can get it to work by telling it to look for ADFS Filecore/Linux
partitions. I can set up the partitions correctly apart from Linux Table - it
wants to stay at 0k - is this OK?
> > although it can see hdc, hdc1, hdc2, hdc3 which are the partitions on a
> > hard disk connected to my APDL IDE interface
> Note that you can't use PartMan on APDL/ICS IDE interfaces (due to IDEFS
> problems).
It still can't see the partitions on the drive (hda) connected to the internal
IDE interface.
Booting into Linux it says:
<snip out stuff not needed>
Icside detected ARCIN v6 on slot 0
hda:ST33232a, 3077mb w/128kB cache, CHS6253/16/63
hdc:Quantum Fireball SE6.4A 6149mb w/80kb cache, CHS13328/15/63
hdd:MATSHITA CR588, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7, 0x3f6 on irq9
ide1 at 0x800d0800-0x800d0807, 0x800d08e0 on irq 32
floppy drive(s): fd0 is 1.44mb, fd1 is 1.44mb
FDC0 is post-1992 82077
scsi: 0 hosts
scsi: detected hosts
Partition Check
hda:[ics]
hdc:[ics]hdc1 hdc2 hdc3 hdc4
The hda disk drive is connected to the internal IDE interface.
The hdc is connected to the APDL card.
The Linux partitions are on he hda device, but somehow linux cannot recognise
them.
I have RISC OS partitions on the Quantum Fireball, and I am able to mount
these, but I cannont mount hda, hda1 etc
TTFN
Nik
--
[EMAIL PROTECTED]
http://www.cheddarcheese.de
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
