I have an RPC 600 with ARMLinux installed but I am having trouble
Telnetting to it from another RPC using ANTterm 0.79.
I get the following error almost immediately after pressing connect.
antterm: Port is 23/telnet
antterm: Trying to connect...
antterm: Connect failed (22/Invalid argument)
antterm: Disconnected
The ARMLinuxRPC has
Red Hat Linux release 3.03
Kernel 2.0.36 on an arm610
During the boot sequence I get the following message.
syslogd:memory violation at pc=0x00008d38 lr=0x60c171c8
(bad address = 0x00000000, code 3)
Is this related? It appears at different times towards the end of the boot
up sequence.
I didn't do the installation and this is all new to me.
I can find my way around (just) and can use vi
I have gone through the following files to setup TCPIP using vi.
vi /etc/sysconfig/network
vi /etc/sysconfig/network-scripts/ifcfg-eth0
vi /etc/HOSTNAME
vi /etc/hosts.allow
vi /ect/hosts.deny
I have also looked in
/etc/inetd.conf and the telnet stream is not remed # out.
The HOWTO docs are not on the Linux HD so I looked for help on
a Red Hat 5.2 CD unfortunately the Net-3-HO file refers to files
that do not appear to be there.
Also I have a book called Running Linux by Walsh and Kaufman and that
has not helped much.
This is an early Chistmas game of "Give Us a Clue" so could anyone
help?
--
PC Robinson
Aleph One Support:- Tel UK (00 44) 1708 403028 Fax UK (00 44) 02 7919 9401
Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK Tel (00 44) 1223 811679
Web site http://www.aleph1.co.uk/
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
