On Sun, 07 May 2000 18:17:59 +0530 (IST), Lavu Sridhar wrote:
> I want to know if I can find a BIOS code which I can run using the ARM SDT
> to initialise the chips on the Cirrus Logic Evaluation Board. If I could
> find any sample code that was written for an ARM processor, then maybe I
> could modify it for my Board. Please let me know where I can find the code
You might want to give blob a try. It's currently written for the SA-1100
CPU, so you'll have to modify start.S and serial.c. The disadvantage
(well, I call it an advantage) is that it must be build using the GNU
toolchain, but you'll need the GNU toolchain anyway if you want to run
Linux on your board. You can get blob at
http://www.lart.tudelft.nl/lartware/blob/ .
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED]
WWW: http://www-ict.its.tudelft.nl/~erik/
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
