In message <[EMAIL PROTECTED]>, Mathias Teikari
<[EMAIL PROTECTED]> writes
>Hi all..
>
>I've run into some problems trying to boot linux on an EBSA-285,
>maybe someone knows of this..
>
>I'm using bios-1.06 with patch ebsa285-bios-1.06.diff2 as only boot
>utility (i.e. no Angel). My kernel is 2.2.15 w. patch-2.2.15-rmk1.
>
>When trying to upload the kernel via the serial port and boot, I get
>the below output. As suggested in bios/drivers/char/flash.c I've
>tried using linux/lib/inflate.c from kernel 2.3.99-pre9 w.
>patch-2.3.99-pre9-rmk1. This, however gives the same result.
>
>Any hints and tips would be appreciated!
baud rate settings that the kernel is using different to monitor
settings maybe ??? sorry, I only lurk here so can't contribute more
HTH
>++++++++
>
>EBSA285 Linux BIOS v1.06
>
> 16384 KB SDRAM OK
>
>Initialising devices: serial port
>
>Hit 's' twice to abort autoboot... starting autoboot
>Trying serial port...
>
>Now send file with y-modem (^X to abort) ...
>.
>
>Transfer complete, press any key.
>Now booting image...
>Uncompressing Linux................. done, booting the kernel.
>����x.x�..x�x.���x.<.x�x.�x.�xxx�.�x.�xx���xxx.x.x.�x��x..x�x.x..x.x.x��x.�x.xx�
>.�x
>
>..x�.x..x.x.x.�x��xx�....x�....x�x�.�.x.x�..x.�x.x.x.�..x�x.�x.�xx.�x.x.x.�x..xx
>.x��x..xxx.�x��x..x�
>
Regards
--
Steve Goodwin
********************************************************************
Any opinions, express or implied, presented are solely those of the
author and do not necessarily represent those of P2 Controllers Ltd.
********************************************************************
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
