On 16 Jul Russell King - ARM Linux Admin <[EMAIL PROTECTED]> wrote:
> Tom Harris writes:
> > I had a look at the expansion card info in the PRMs (4-119) and it
> > seems that the card ID is only mandated to be at the bottom of
> > expansion card space immediately after a reset. Perhaps it's not paged
> > in? Or is a faulty backplane a more likely problem?
>
> I suspect that there's a problem with the cards firmware. Can you try
> something for me please?
Certainly.
> Try hitting ctrl-reset and then see if the card is still detected. I
> have a suspicion that it won't be. If this is the case, then the
> firmware is buggy, and thinks get complicated ;(
Ctrl-reset and leaving to boot to desktop, f12, *podules -> shows
correctly.
Ctrl-reset and * to supervisor, *podules -> shows correctly.
Also the same in both cases with the unmodified reset button and
ctrl-break, though I doubt it made a difference as IIRC there's only one
type of reset in RISC OS 3.5+.
Any thoughts/ideas?
Tom
--
Tom Harris
[EMAIL PROTECTED]
http://www.harris.ukgateway.net/
* Gee, it's fun that we're speaking in tongues. (Buffy, BtVS)
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
