Hi all,
Seems I have the exact same problem. I'm running under 2.6.20-16
(ubuntu, feisty), however.
It wasn't detected correctly just like in the OP, so I upgraded the alsa
driver(s) as suggested in this thread, and now it's detected properly
(seemingly). But, to my dismay, no midi events are received whatsoever...
Is there some tracing somewhere that can be enabled to see if anything
is received at all?
André
Ok, that gives me a port in my qjackctrl-connection-window, but
unfortunaltely nothing comes out of it ..... Any suggestions, what could
be wrong?
Thanks and regards,
Michael
Clemens Ladisch schrieb:
Bengt Gördén wrote:
tisdag 18 september 2007 06:25 skrev Mark Watkins:
I am trying to get the ESI MIDImate (EGO SYstems) to work.
I am running 2.6.17-5mdv and here is the /proc/bus/usb/devices entry:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=1
P: Vendor=0a92 ProdID=1001 Rev= 1.04
It sounds like you're having this trouble:
http://www.ussg.iu.edu/hypermail/linux/kernel/0706.0/2282.html
The workaround is in alsa-driver-1.0.15rc2.
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-dev
