On Thu, Aug 20, 2009 at 12:57:16PM -0500, Gabriel M. Beddingfield wrote: > I had trouble with this, too. See my other post for "good" settings. The > trick seems to be that the "Drive" and "Decay" settings are tricky and > typically have a very small range of settings where they are sensible.
The 'Drive' setting is just a gain factor before the level/envelope detector. You will have to adjust it to the input level you provide to the plugin. It has a range of 40 dB which should cover even the most extreme cases. Decay has range of 50ms to 5s (with an exponential control law, mid = 0.5s) which seems sensible to me. In most cases you'd use the left half of the range but if you have long sustainded notes on which you want a slow resonance frequency decay the right half could provide what you need. CIao, -- FA Io lo dico sempre: l'Italia รจ troppo stretta e lunga. _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@lists.linuxaudio.org http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev