On Fri, Dec 04, 2009 at 07:41:56PM +0000, Folderol wrote: > I decided to do some more detailed investigations, because while I > totally accept your statements, the actual measured results were quite > different. I was getting an essentially flat response right the way up > to 99.9kHz, a little wobble between ranges but no more that +2dB, and > about +1dB at 40kHz.
Compared to the 0.1% spec on the resistors these are big errors. 1dB is 12%. 0.1% is less than 0.01dB. A reasonable target would be 1% accuracy, that is less that 0.1dB. Ciao, -- FA Wie der Mond heute Nacht aussieht ! Ist es nicht ein seltsames Bild ? _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@lists.linuxaudio.org http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev