Hi Jc_Gui create configuration scripts to run them with jconvolver. They are saved in ~./Jc_Gui/jcov_name.set To run jconvolver with Jc_Gui you only need to connect Jc_Gui;in_0 / in_1 and Jc_Gui:out_0 / out_1 Jc_Gui starts jconvolver with a execl() call, and connect it to those ports. Mostly you need to recalibrate the gain setting in jconv settings widget, it's per default at 0.2 , witch is real low. It didn't help to recalibrate the gain settings in the main widget, they only set the gain for the input to jconvolver, instead the gain settings in the jconv settings widget, set the convolution level.
Calibrate the wet/dry slider to the right side to run jconvolver wet. You can run the resulted config scripts also direct with jconvolver as usual. A discussion tread about jcgui is here, maybe there are some useful informations to. http://www.linuxmusicians.com/viewtopic.php?f=28&t=597 regards hermann Am Dienstag, den 29.12.2009, 07:08 +0100 schrieb Ralf Mardorf: > Hi :) > > running jconvolver by using configuration scripts is fine, using Jc_Gui > instead of a configuration script there isn't really reverb. > Maybe I'm to stupid to do the right connections or what ever. Is there a > user manual? > > Disappointed greetz ;), > Ralf _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-dev