I've written the following bit if ugliness to ease the tedium of
doing setup/teardown of bcache devices. This is particularly handy
when testing things. Anyway, here it is, in the odd chance that it
might make things easier for anyone else.
-davidc
#!/bin/sh
action=$1
CREATE_LOG=bcache_create.log
DESTROY_LOG=bcache_destroy.log
case $action in
create)
[ -z "$2" ] && { echo "Error: Missing backing device."; exit 1; }
[ -b "$2" ] || { echo "Error: Invalid backing device."; exit 1; }
BACKING_DEV=$(readlink -e $2)
CACHE_DEV=$(readlink -e $3)
MNTPOINT=$4
backing_part=$(basename $BACKING_DEV)
backing_root=$(basename $BACKING_DEV |sed -e 's/(md|sd[a-z])[0-9]/\\1/g')
if [ "$backing_part" = "$backing_root" ]; then
backing_part=
fi
backing_sysfs_bcache=/sys/block/$backing_root/${backing_part:+${backing_part}/}/bcache/
[ -d "$backing_sysfs_bcache" ] && { echo "Error: $BACKING_DEV is already a
registered bcache device."; exit 1; }
cache_set=$(ls -1 /sys/fs/bcache |grep -v register |head -n1)
if [ -n "$CACHE_DEV" -a -z "$cache_set" ]; then
[ -b "$CACHE_DEV" ] || { echo "Error: Invalid cache device."; exit 1; }
cache_part=$(basename $CACHE_DEV)
cache_root=$(basename $CACHE_DEV |sed -e 's/[0-9]//g')
cache_sysfs_bcache=/sys/block/$cache_root/$cache_part/bcache/
[ -d "$cache_sysfs_bcache" ] && { echo "Error: $CACHE_DEV is already a
registered bcache device."; exit 1; }
echo "Initializing cache device..."
make-bcache -C --writeback $CACHE_DEV > "$CREATE_LOG" 2>&1
echo $CACHE_DEV > /sys/fs/bcache/register
else
[ -z "$cache_set" ] && { echo "Error: Missing cache device."; exit 1; }
echo "Using existing cache set: $cache_set"
fi
echo "Initializing backing device..."
make-bcache -B --writeback $BACKING_DEV > "$CREATE_LOG" 2>&1
echo $BACKING_DEV > /sys/fs/bcache/register
# It seems that this can take a small amount of time. Wait, to ensure
# that the devices are properly registered
sleep 2
echo "Creating bcache device..."
cache_set=$(ls -1 /sys/fs/bcache |grep -v register |head -n1)
echo $cache_set > $backing_sysfs_bcache/attach
# It seems that this can take a small amount of time. Wait, to ensure
# that the bcache device is set up.
sleep 2
bcache_dev=$(basename $(readlink ${backing_sysfs_bcache}/dev))
if [ -n "$bcache_dev" ]; then
echo "Device $bcache_dev created."
if [ -n "$MNTPOINT" -a -d "$MNTPOINT" ]; then
echo "Creating filesystem..."
mkfs.ext4 /dev/$bcache_dev > "$CREATE_LOG" 2>&1
tune2fs -o journal_data_writeback /dev/$bcache_dev
echo "Mounting on $MNTPOINT"
mount /dev/$bcache_dev $MNTPOINT > "$CREATE_LOG" 2>&1
fi
echo "done."
else
echo "Error: No bcache dev found"
exit 1
fi
;;
destroy)
[ -z "$2" ] && { echo "Error: Missing device."; exit 1; }
dev=$2
if [ "${dev#/dev/bcache}" != "$dev" ]; then
[ -b "$dev" ] || { echo "Error: Invalid bcache device."; exit 1; }
BCACHE_DEV=$dev
bcache_part=$(basename $BCACHE_DEV)
for bdev in /sys/block/$bcache_part/bcache/cache/bdev*; do
BACKING_DEV="/dev/$(basename $(dirname $(readlink $bdev)))
$BACKING_DEV"
done
CACHE_DEV=/dev/$(basename $(dirname $(readlink
/sys/block/$bcache_part/bcache/cache/cache0)))
else
[ -b "$dev" ] || { echo "Error: Invalid backing device."; exit 1; }
BACKING_DEV=$2
fi
if [ -n "$MNTPOINT" -a -d "$MNTPOINT" ]; then
echo "Unmounting device..."
umount "$MNTPOINT" > "$DESTROY_LOG" 2>&1
fi
for bdev in $BACKING_DEV; do
backing_part=$(basename $bdev)
backing_root=$(basename $BACKING_DEV |sed -e 's/(md|sd[a-z])[0-9]/\\1/g')
if [ "$backing_part" = "$backing_root" ]; then
backing_part=
fi
backing_sysfs_bcache=/sys/block/$backing_root/${backing_part:+${backing_part}/}/bcache/
[ -d "$backing_sysfs_bcache" ] || { echo "Error: $bdev is not a
registered bcache device."; exit 1; }
echo "Detaching cache from backing store '$bdev'..."
echo 1 > $backing_sysfs_bcache/detach
# I don't know for sure that "stop" will only complete once dirty data
# has been written out.
echo "Stopping backing store '$bdev'..."
{ echo 1 > $backing_sysfs_bcache/stop; } > "$DESTROY_LOG" 2>&1
done
if [ -n "$CACHE_DEV" ]; then
cache_part=$(basename $CACHE_DEV)
cache_root=$(basename $CACHE_DEV |sed -e 's/[0-9]//g')
cache_sysfs_bcache=/sys/block/$cache_root/$cache_part/bcache/
if [ ! -d "$cache_sysfs_bcache" ]; then
echo "Error: $CACHE_DEV is not a registered bcache device."
else
echo "Stopping cache device..."
{ echo 1 > /sys/block/$cache_root/$cache_part/bcache/set/stop; } >
"$DESTROY_LOG" 2>&1
fi
fi
echo "done."
;;
*)
echo "Error: invalid action '$action'"
echo
echo "Usage: bsetup create <backing device> [ <cache device> ]"
echo " bsetup destroy { <bcache device> | <backing device> }"
echo
echo "On create, a cache device will be created if supplied. Otherwise"
echo "it is assumed that an existing cache set should be used."
echo
echo "On destroy, the backing device and cache set will be removed if"
echo "a bcache device is given. Otherwise, only the backing device is"
echo "removed"
exit 1
;;
esac
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
