On Tue, May 23, 2017 at 1:22 PM, Ulf Hansson <ulf.hans...@linaro.org> wrote:
> [...]
>
>>>>> +#if IS_ENABLED(CONFIG_MMC_BLOCK)
>>>>
>>>> What wrong with a regular ifdefs stubs? Why do you need IS_ENABLED()?
>>>
>>> This is because the entire block layer can be compiled as a
>>> module.
>>
>> The block layer cannot be a module, but the MMC layer can.
>>
>>> I'm all for making CONFIG_MMC_BLOCK into a bool... but
>>> don't know how people (Intel laptops) feel about that extra
>>> code in their kernel at all times.
>>
>> I think CONFIG_MMC should remain tristate. However, we could
>> consider making CONFIG_MMC_BLOCK a 'bool' symbol and
>> linking it into the mmc-core module when enabled.
>
> That is a good idea, no matter what. We should do the same thing for
> CONFIG_MMC_TEST. There are really no need to have to separate modules,
> one is more than enough.
I think for the test module it conceptually makes more sense to
be separate, though I can see that this requires to be careful
with the debugfs file lifetime rules.
>>>> It seems like the life cycle of the card debugfs node is now being
>>>> controlled as when the mmc block device driver has been successfully
>>>> probed. We need to deal with that somehow.
>>>
>>> Only for these two files but yes.
>>>
>>> ext_csd is a bit dubious as it is only available on storage devices
>>> (eMMC) that can not be SD, SDIO or combo cards, and we could make
>>> it only appear if using the block layer.
>>>
>>> The card status however we need to keep if people want it.
>>>
>>> We *COULD* consider just thrashing these debugfs files. It is not
>>> technically ABI and I wonder who is actually using them.
>>
>> I think the ext_csd is extremely useful on storage devices to have
>> exposed to user space in some form. There is a comment saying
>> that we don't store it in RAM at the moment as it is rarely used,
>> but we could change that, as it's only 512 bytes per eMMC device
>> and there is rarely more than one of them. IIRC, the ext_csd is
>> entirely readonly and doesn't change during runtime, so we
>> gain nothing by issuing the commands every time someone reads
>> the debugfs file.
>
> First, we have mmc utils (going via mmc ioctl), which purpose are
> exactly for these cases. As a matter of fact it does a better job,
> since it even present the data in a more human readable format.
>
> Second, ext csd gets updated very often to control/change some
> behavior of the device. You must be mixing this up with some of the
> other card registers.
Ok, it's been a while since I looked at the details, thanks for the
clarification.
Arnd
