The current calculation for pi_bytes{out,in} assumes a 512 byte logical
block size and a protection interval exponent of 0, i.e. 512 bytes data
+ 8 bytes PI. When run on a 4 KiB logical block size device with a
protection interval exponent of 0, i.e. 4096 bytes data + 8 bytes PI,
the driver miscalculates the pi_bytes{out,in} by a factor of 8x (64
bytes).
This leads to errors on all reads and writes on 4 KiB logical block size
devices when CONFIG_BLK_DEV_INTEGRITY is enabled and the
VIRTIO_SCSI_F_T10_PI feature bit has been negotiated.
Fixes: e6dc783a38ec0 ("virtio-scsi: Enable DIF/DIX modes in SCSI host LLD")
Signed-off-by: Greg Edwards <gedwa...@ddn.com>
---
drivers/scsi/virtio_scsi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 6dc8891ccb74..a1e85ab76f74 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -513,12 +513,12 @@ static void virtio_scsi_init_hdr_pi(struct virtio_device
*vdev,
if (sc->sc_data_direction == DMA_TO_DEVICE)
cmd_pi->pi_bytesout = cpu_to_virtio32(vdev,
- blk_rq_sectors(rq) *
- bi->tuple_size);
+ bio_integrity_bytes(bi,
+ blk_rq_sectors(rq)));
else if (sc->sc_data_direction == DMA_FROM_DEVICE)
cmd_pi->pi_bytesin = cpu_to_virtio32(vdev,
- blk_rq_sectors(rq) *
- bi->tuple_size);
+ bio_integrity_bytes(bi,
+ blk_rq_sectors(rq)));
}
#endif
--
2.17.1
