On 1/23/24 02:36, Christoph Hellwig wrote:
> Add a new queue_limits_{start,commit}_update pair of functions that
> allows taking an atomic snapshot of queue limits, update it, and
> commit it if it passes validity checking.
>
> Signed-off-by: Christoph Hellwig <[email protected]>
> ---
> block/blk-core.c | 1 +
> block/blk-settings.c | 140 +++++++++++++++++++++++++++++++++++++++++
> block/blk.h | 1 +
> include/linux/blkdev.h | 23 +++++++
> 4 files changed, 165 insertions(+)
>
> diff --git a/block/blk-core.c b/block/blk-core.c
> index 11342af420d0c4..09f4a44a4aa3cc 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -424,6 +424,7 @@ struct request_queue *blk_alloc_queue(int node_id)
> mutex_init(&q->debugfs_mutex);
> mutex_init(&q->sysfs_lock);
> mutex_init(&q->sysfs_dir_lock);
> + mutex_init(&q->limits_lock);
> mutex_init(&q->rq_qos_mutex);
> spin_lock_init(&q->queue_lock);
>
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index e872b0e168525e..b6692143ccf034 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -96,6 +96,146 @@ static void blk_apply_bdi_limits(struct backing_dev_info
> *bdi,
> bdi->io_pages = lim->max_sectors >> (PAGE_SHIFT - 9);
> }
>
> +static int blk_validate_zoned_limits(struct queue_limits *lim)
> +{
> + if (!lim->zoned) {
> + if (WARN_ON_ONCE(lim->max_open_zones) ||
> + WARN_ON_ONCE(lim->max_active_zones) ||
> + WARN_ON_ONCE(lim->zone_write_granularity) ||
> + WARN_ON_ONCE(lim->max_zone_append_sectors))
> + return -EINVAL;
> + return 0;
> + }
> +
> + if (WARN_ON_ONCE(!IS_ENABLED(CONFIG_BLK_DEV_ZONED)))
> + return -EINVAL;
> +
> + if (lim->zone_write_granularity < lim->logical_block_size)
> + lim->zone_write_granularity = lim->logical_block_size;
This check and change needs to be against the physical block size. Otherwise,
SMR drives will choke on it.
> +
> + if (lim->max_zone_append_sectors) {
> + if (WARN_ON_ONCE(!lim->chunk_sectors))
> + return -EINVAL;
chunk_sectors is the zone size. So we should probably check that it is set after
the IS_ENABLED() check earlier in the function, no ?
> + lim->max_zone_append_sectors =
> + min3(lim->max_hw_sectors,
> + lim->max_zone_append_sectors,
> + lim->chunk_sectors);
> + }
> +
> + return 0;
> +}
> +
> +int blk_validate_limits(struct queue_limits *lim)
> +{
> + unsigned int max_hw_sectors;
> +
> + if (!lim->logical_block_size)
> + lim->logical_block_size = SECTOR_SIZE;
> +
> + if (!lim->physical_block_size)
> + lim->physical_block_size = SECTOR_SIZE;
> + if (lim->physical_block_size < lim->logical_block_size)
> + lim->physical_block_size = lim->physical_block_size;
> +
> + if (!lim->io_min)
> + lim->io_min = SECTOR_SIZE;
This should be lim->logical_block_size, no ?
> + if (lim->io_min < lim->physical_block_size)
> + lim->io_min = lim->physical_block_size;
But then given that log <= phys, you could set io_min to physical_block_size if
it is not set.
> +
> + if (!lim->max_hw_sectors)
> + lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
> + if (WARN_ON_ONCE(lim->max_hw_sectors < PAGE_SIZE / SECTOR_SIZE))
You can use PAGE_SECTORS here.
> + return -EINVAL;
> +
> + lim->max_hw_sectors = round_down(lim->max_hw_sectors,
> + lim->logical_block_size >> SECTOR_SHIFT);
> +
> + max_hw_sectors = min_not_zero(lim->max_hw_sectors,
> + lim->max_dev_sectors);
> + if (lim->max_user_sectors) {
> + if (lim->max_user_sectors > max_hw_sectors ||
> + lim->max_user_sectors < PAGE_SIZE / SECTOR_SIZE)
same here.
> + return -EINVAL;
> + lim->max_sectors = min(max_hw_sectors, lim->max_user_sectors);
> + } else {
> + lim->max_sectors = min(max_hw_sectors, BLK_DEF_MAX_SECTORS_CAP);
> + }
> +
> + lim->max_sectors = round_down(lim->max_sectors,
> + lim->logical_block_size >> SECTOR_SHIFT);
> +
> + if (!lim->max_segments)
> + lim->max_segments = BLK_MAX_SEGMENTS;
> +
> + lim->max_discard_sectors = lim->max_hw_discard_sectors;
> + if (!lim->max_discard_segments)
> + lim->max_discard_segments = 1;
> +
> + if (lim->discard_granularity < lim->physical_block_size)
> + lim->discard_granularity = lim->physical_block_size;
> +
> + if (!lim->seg_boundary_mask)
> + lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
> + if (WARN_ON_ONCE(lim->seg_boundary_mask < PAGE_SIZE - 1))
> + return -EINVAL;
> +
> + if (!lim->max_segment_size)
> + lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
> + if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
> + return -EINVAL;
> +
> + /*
> + * Devices that require a virtual boundary do not support scatter/gather
> + * I/O natively, but instead require a descriptor list entry for each
> + * page (which might not be idential to the Linux PAGE_SIZE). Because
> + * of that they are not limited by our notion of "segment size".
> + */
> + if (lim->virt_boundary_mask) {
> + if (WARN_ON_ONCE(lim->max_segment_size &&
> + lim->max_segment_size != UINT_MAX))
> + return -EINVAL;
> + lim->max_segment_size = UINT_MAX;
> + }
> +
> + if (!lim->dma_alignment)
> + lim->dma_alignment = SECTOR_SIZE - 1;
> + if (WARN_ON_ONCE(lim->dma_alignment > PAGE_SIZE))
> + return -EINVAL;
> +
> + if (lim->alignment_offset) {
> + lim->alignment_offset &= (lim->physical_block_size - 1);
> + lim->misaligned = 0;
> + }
> +
> + return blk_validate_zoned_limits(lim);
> +}
> +
> +/**
> + * queue_limits_commit_update - commit an atomic update of queue limits
> + * @q: queue to update
> + * @lim: limits to apply
> + *
> + * Apply the limits in @lim that were obtained from
> queue_limits_start_update()
> + * and updated by the caller to @q.
> + *
> + * Returns 0 if successful, else a negative error code.
> + */
> +int queue_limits_commit_update(struct request_queue *q,
> + struct queue_limits *lim)
> + __releases(q->limits_lock)
> +{
> + int error = blk_validate_limits(lim);
> +
> + if (!error) {
> + q->limits = *lim;
> + if (q->disk)
> + blk_apply_bdi_limits(q->disk->bdi, lim);
> + }
> + mutex_unlock(&q->limits_lock);
> + return error;
> +}
> +EXPORT_SYMBOL_GPL(queue_limits_commit_update);
> +
> /**
> * blk_queue_bounce_limit - set bounce buffer limit for queue
> * @q: the request queue for the device
> diff --git a/block/blk.h b/block/blk.h
> index 1ef920f72e0f87..58b5dbac2a487d 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -447,6 +447,7 @@ static inline void bio_release_page(struct bio *bio,
> struct page *page)
> unpin_user_page(page);
> }
>
> +int blk_validate_limits(struct queue_limits *lim);
> struct request_queue *blk_alloc_queue(int node_id);
>
> int disk_scan_partitions(struct gendisk *disk, blk_mode_t mode);
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 4a2e82c7971c86..5b5d3b238de1e7 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -473,6 +473,7 @@ struct request_queue {
>
> struct mutex sysfs_lock;
> struct mutex sysfs_dir_lock;
> + struct mutex limits_lock;
>
> /*
> * for reusing dead hctx instance in case of updating
> @@ -861,6 +862,28 @@ static inline unsigned int
> blk_chunk_sectors_left(sector_t offset,
> return chunk_sectors - (offset & (chunk_sectors - 1));
> }
>
> +/**
> + * queue_limits_start_update - start an atomic update of queue limits
> + * @q: queue to update
> + *
> + * This functions starts an atomic update of the queue limits. It takes a
> lock
> + * to prevent other updates and returns a snapshot of the current limits that
> + * the caller can modify. The caller must call queue_limits_commit_update()
> + * to finish the update.
> + *
> + * Context: process context. The caller must have frozen the queue or
> ensured
> + * that there is outstanding I/O by other means.
> + */
> +static inline struct queue_limits
> +queue_limits_start_update(struct request_queue *q)
> + __acquires(q->limits_lock)
> +{
> + mutex_lock(&q->limits_lock);
> + return q->limits;
> +}
> +int queue_limits_commit_update(struct request_queue *q,
> + struct queue_limits *lim);
> +
> /*
> * Access functions for manipulating queue properties
> */
--
Damien Le Moal
Western Digital Research
