--- Jonathas Logness <[EMAIL PROTECTED]>
escreveu: > Ol� Pessoal,
>
> Uso o lilo para gerenciar dois boot�s com
> Linux e Ms-Windows no mesmo hd, mais o lilo
> pode me dar a op��o de carregar o Ms-Windows
> que est� em outro hd, na ide2 ?
>
> /dev/hda1 => primeiro hd = Linux (ide1)
> /dev/hdc1 => segundo hd = Ms-Windows (ide2)
>
> Agrade�o qualquer sugest�o !
Do man lilo.conf:
disk=device-name Defines non-standard
parameters for the specified disk. See
section "Disk geometry" of user.tex for
details. Especially useful is the `bios=' parame�
ter. The BIOS numbers your disks 0x80,
0x81, etc. and it is impossible to
decide which Linux disk corresponds to
which BIOS disk (since this depends on
the BIOS setup, and on the type of BIOS), so if
you have an unusual setup you need to state
the correspondence between Linux disks
and BIOS disks. For example,
disk=/dev/sda
bios=0x80 disk=/dev/hda
bios=0x81 would say that
your SCSI disk is the first BIOS
disk, and your (primary master) IDE
disk is the
second BIOS disk.
--
F�bio Junior
[EMAIL PROTECTED]
_______________________________________________________________________________________________
Yahoo! GeoCities
Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo! GeoCities. � f�cil
e gr�tis!
http://br.geocities.yahoo.com/
Assinantes em 01/08/2001: 2253
Mensagens recebidas desde 07/01/1999: 125825
Historico e [des]cadastramento: http://linux-br.conectiva.com.br
Assuntos administrativos e problemas com a lista:
mailto:[EMAIL PROTECTED]
