Galera, alguem j� conseguiu fazer funcionar o multlink da telef�nica com
terminal da ericsson.
Entrei em contato com o suporte deles questionando a conex�o pelo kppp e a
128K e obtive a seguinte resposta:
*************************************************************************
Dear Mr. Uva
In order to change to 128kbps connection use ATB31 = MLPPP protocol.
The description is based on SUSE LINUX 7.1 but it is also valid for other
LINUX distributions.
The second way is to enter the 2-B-channel access fix in the NT1+2a/b+V.24
with AT commands.
Start therefore a terminal program with direct connection to the NT+ and use
following AT commands:
ATB31 - changes the protocol
AT&W - saves the changes in the NT+
Please check also your modem string if there is a entry like "AT&F1". This
initialize the V.24 port and set back to default values. That means all made
settings are chancelled. So this string should be deleted.
The NT1+ includes some other functionalities to control bandwidth which is
used for the internet access. It can be set by AT - commands.
Therefore start a terminal window with direct connection to the NT+
Enter configuration mode (ATconf) you will see "#" at the beginning of each
line. Now all commands can be entered without AT ("show" shows you the
actual settings)
Maybe you can send also the configuration of the NT+ by starting the
terminal window for the corresponding com-port and entering "AT**SHOW"?
Bandwidth On Demand
Add or remove one B-channel from the connection depending on transfer speed:
bod: 0 (activate or deactivate [0,1])
bodiv: 40 (increase speed [any value in kbps])
bodit: 30 (increase time [any value in sec.] - e.g. add the second
channel after 30 sec. if the transfer rate is for that time more than 40
kbps)
boddv: 40 (decrease speed [any value in kbps])
boddt: 30 (decrease time [any value in sec.] - e.g. hook on the second
channel after 30 sec. if the transfer rate is for that time less than 40
kbps)
Call Bumping
opens a channel from a MLPPP connection for incomming or outgoing calls of
the ananlogue ports (!depends also on the exchange of network operator)
cmlp [value: 0(off),1(incomming calls),2(outgoing calls),3( in and out)]
finish after entering with "save" and "exit" to close the config mode.
(otherwise the port is not open for connection with AT- commands)
If your are going to try this functionality please send me your expierience
with the seting in LINUX in order to improve our customer service it is also
helpful for us to get feedback from the clients. Thank you.
Best regards
Rene Raudies
****************************************************************************
S� que mesmo inserindo o ATB31 na string como ele falou, o terminal n�o
aceita, continua conectando somente a 64Kbps.
Alguem pode me ajudar a construir essa string por favor?
Obrigado a todos,
Pedro Uva.
P.S. Desculpe pelo tamanho do e-mail
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.371 / Virus Database: 206 - Release Date: 13/06/2002
Assinantes em 16/06/2002: 2241
Mensagens recebidas desde 07/01/1999: 171304
Historico e [des]cadastramento: http://linux-br.conectiva.com.br
Assuntos administrativos e problemas com a lista:
mailto:[EMAIL PROTECTED]
