Srs. Estou com a configura��o do ipsec.conf da vers�o FreeSwan 1.95 como segue abaixo; # /etc/ipsec.conf - FreeS/WAN IPsec configuration file # More elaborate and more varied sample configurations can be found # in FreeS/WAN's doc/examples file, and in the HTML documentation. # basic configuration config setup # THIS SETTING MUST BE CORRECT or almost nothing will work; # %defaultroute is okay for most simple cases. interfaces=%defaultroute # Debug-logging controls: "none" for (almost) none, "all" for lots. klipsdebug=none plutodebug=none # Use auto= parameters in conn descriptions to control startup actions. plutoload=%search plutostart=%search # Close down old connection when new one using same ID shows up. uniqueids=yes # defaults for subsequent connection descriptions # (mostly to fix internal defaults which, in retrospect, were badly chosen) conn %default keyingtries=0 disablearrivalcheck=no authby=secret leftrsasigkey=%dns rightrsasigkey=%dns # connection description for (experimental!) opportunistic encryption # (requires KEY record in your DNS reverse map; see doc/opportunism.howto) conn me-to-anyone left=%defaultroute right=%opportunistic keylife=1h rekey=no # uncomment this next line to enable it #auto=route # sample VPN connection conn bureau # Left security gateway, subnet behind it, next hop toward right. left=0.0.0.0 leftsubnet= leftnexthop= # Right security gateway, subnet behind it, next hop toward left. right=200.163.xx.xxx rightsubnet=192.xxx.x.x/24 rightnexthop=200.163.xx.x # To authorize this connection, but not actually start it, at startup, # uncomment this. auto=add E no cliente PGPNet 7.0.3 com Windows 98 SE, configurado conforme descritivo de Jean-Francois Nadeu, e estou tendo a seguinte mensagem de erro no Log; "Response Timeout" "Unable to Establish Security Association" Se algu�m puder me ajudar agrade�o; Abra�os Olavo [EMAIL PROTECTED] Assinantes em 05/07/2002: 2222 Mensagens recebidas desde 07/01/1999: 174012 Historico e [des]cadastramento: http://linux-br.conectiva.com.br Assuntos administrativos e problemas com a lista: mailto:[EMAIL PROTECTED]
