Ol�, Tenho um gravador de cd LG 24x10x40 e estou tendo problemas com o cdrecord. Ripei um cd de audio e estou tentando gravar os .wav gerados com o cd record:
#cdrecord -pad -v dev=0,1,0 -audio *.wav Mas aparece uma mensagem de erro, que pode ser vista abaixo? O mais interessante � que j� gravei um cd com as mesmas m�sicas (.wav) exatamente do mesmo modo. Algu�m tem id�ia de como solucionar o problema? PS: antes que alguem pergunte o dev=0,1,0 est� certo pois tenho um drive de cd normal em 0,0,0. []s, -- Daniel Ferreira [EMAIL PROTECTED] S�o Leopoldo/RS - BR -------------------------------- Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling TOC Type: 0 = CD-DA scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.1.22 Using libscg version 'schily-0.7' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8240B ' Revision : '1.07' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 6037504 = 5896 KB FIFO size : 4194304 = 4096 KB Track 01: audio 28 MB (02:51.29) no preemp Track 02: audio 22 MB (02:12.53) no preemp Track 03: audio 46 MB (04:33.77) no preemp Track 04: audio 39 MB (03:53.00) no preemp Track 05: audio 21 MB (02:08.16) no preemp Track 06: audio 29 MB (02:57.44) no preemp Track 07: audio 26 MB (02:35.46) no preemp Track 08: audio 57 MB (05:41.53) no preemp Track 09: audio 26 MB (02:38.89) no preemp Track 10: audio 44 MB (04:26.24) no preemp Track 11: audio 22 MB (02:11.69) no preemp Track 12: audio 31 MB (03:09.50) no preemp Track 13: audio 24 MB (02:24.82) no preemp Track 14: audio 32 MB (03:13.57) no preemp Track 15: audio 23 MB (02:22.06) no preemp Track 16: audio 27 MB (02:46.20) no preemp Track 17: audio 22 MB (02:13.20) no preemp Track 18: audio 27 MB (02:45.76) no preemp Track 19: audio 37 MB (03:44.00) no preemp Track 20: audio 33 MB (03:16.97) no preemp Total size: 633 MB (62:44.13) = 282310 sectors Lout start: 633 MB (62:46/10) = 282310 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 7 Is not unrestricted Is not erasable ATIP start of lead in: -11538 (97:28/12) ATIP start of lead out: 359849 (79:59/74) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 7 Manufacturer: GIGASTORAGE CORPORATION Blocks total: 359849 Blocks current: 359849 Blocks remaining: 77539 Starting to write CD/DVD at speed 24 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 28 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 40s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 5.031s Average write speed 750.0x. Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 480s cmd finished after 0.001s timeout 480s Fixating time: 0.004s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. Assinantes em 21/01/2003: 2241 Mensagens recebidas desde 07/01/1999: 197926 Historico e [des]cadastramento: http://linux-br.conectiva.com.br Assuntos administrativos e problemas com a lista: mailto:[EMAIL PROTECTED]
