Daniel Pocock posted on Thu, 15 Jan 2015 20:54:10 +0100 as excerpted: > Can anybody comment on how BtrFs (particularly RAID1 mirroring) > interacts with drives that offer error recovery control (or TLER in WDC > terms)? > > I generally prefer to buy this type of drive for any serious data > storage purposes > > I notice ZFS gets a mention in the Wikipedia article about the topic: > http://en.wikipedia.org/wiki/Error_recovery_control > > Should BtrFs be mentioned there too?
I make no claims to being an expert in this area and others with more expertise will likely be along shortly. However... In general you have a valid worry, and the recommendation is as with other raid technology, if possible, set your device to a recovery time under 30 seconds, as that's the default Linux SCSI level link reset time, and it will short-circuit the process and doesn't get the bad sector marked as such and remapped to a reserve sector, on the device. On consumer level devices where setting the device recovery time isn't possible, the hard-wired recovery time can be near two minutes, so the recommendation is to set the Linux SCSI level link reset time to 120 seconds or so, thus allowing the hardware device to timeout first so it can again recognize the bad sector and do its remapping thing. In general, this recommendation should apply to all Linux-kernel-based soft-raid technologies (including btrfs, mdraid, dmraid...) where the raid redundancy can fill in the missing data so letting it fail and potentially trigger a remap is the best strategy. OTOH, the shorter time wouldn't be recommended (tho a longer SCSI reset time well could be) for a single-device btrfs or a multi-device btrfs in raid0 or single mode, because in those cases, the assumption is that there's no other copies of the data, so letting the device take up to two minutes to try to retrieve that data in the hope that the extra tries will finally be successful, can very possibly save that data... of course at the cost of a system that goes unresponsive for upto two minutes at a time, which clearly isn't going to work if it's happening frequently. -- Duncan - List replies preferred. No HTML msgs. "Every nonfree program has a lord, a master -- and if you use the program, he is your master." Richard Stallman -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
