Liu Bo wrote on 2015/12/15 17:53 -0800:
On Wed, Dec 16, 2015 at 09:20:45AM +0800, Qu Wenruo wrote:
Chris Mason wrote on 2015/12/15 16:59 -0500:
On Mon, Dec 14, 2015 at 10:08:16AM +0800, Qu Wenruo wrote:
Martin Steigerwald wrote on 2015/12/13 23:35 +0100:
Hi!
For me it is still not production ready.
Yes, this is the *FACT* and not everyone has a good reason to deny it.
Again I ran into:
btrfs kworker thread uses up 100% of a Sandybridge core for minutes on random
write into big file
https://bugzilla.kernel.org/show_bug.cgi?id=90401
Not sure about guideline for other fs, but it will attract more dev's
attention if it can be posted to maillist.
No matter whether SLES 12 uses it as default for root, no matter whether
Fujitsu and Facebook use it: I will not let this onto any customer machine
without lots and lots of underprovisioning and rigorous free space monitoring.
Actually I will renew my recommendations in my trainings to be careful with
BTRFS.
From my experience the monitoring would check for:
merkaba:~> btrfs fi show /home
Label: 'home' uuid: […]
Total devices 2 FS bytes used 156.31GiB
devid 1 size 170.00GiB used 164.13GiB path /dev/mapper/msata-home
devid 2 size 170.00GiB used 164.13GiB path /dev/mapper/sata-home
If "used" is same as "size" then make big fat alarm. It is not sufficient for
it to happen. It can run for quite some time just fine without any issues, but
I never have seen a kworker thread using 100% of one core for extended period
of time blocking everything else on the fs without this condition being met.
And specially advice on the device size from myself:
Don't use devices over 100G but less than 500G.
Over 100G will leads btrfs to use big chunks, where data chunks can be at
most 10G and metadata to be 1G.
I have seen a lot of users with about 100~200G device, and hit unbalanced
chunk allocation (10G data chunk easily takes the last available space and
makes later metadata no where to store)
Maybe we should tune things so the size of the chunk is based on the
space remaining instead of the total space?
Submitted such patch before.
David pointed out that such behavior will cause a lot of small fragmented
chunks at last several GB.
Which may make balance behavior not as predictable as before.
At least, we can just change the current 10% chunk size limit to 5% to make
such problem less easier to trigger.
It's a simple and easy solution.
Another cause of the problem is, we understated the chunk size change for fs
at the borderline of big chunk.
For 99G, its chunk size limit is 1G, and it needs 99 data chunks to fully
cover the fs.
But for 100G, it only needs 10 chunks to covert the fs.
And it need to be 990G to match the number again.
max_stripe_size is fixed at 1GB and the chunk size is stripe_size *
data_stripes,
may I know how your partition gets a 10GB chunk?
Oh, it seems that I remembered the wrong size.
After checking the code, yes you're right.
A stripe won't be larger than 1G, so my assumption above is totally wrong.
And the problem is not in the 10% limit.
Please forget it.
Thanks,
Qu
Thanks,
-liubo
The sudden drop of chunk number is the root cause.
So we'd better reconsider both the big chunk size limit and chunk size limit
to find a balanaced solution for it.
Thanks,
Qu
And unfortunately, your fs is already in the dangerous zone.
(And you are using RAID1, which means it's the same as one 170G btrfs with
SINGLE data/meta)
In addition to that last time I tried it aborts scrub any of my BTRFS
filesstems. Reported in another thread here that got completely ignored so
far. I think I could go back to 4.2 kernel to make this work.
We'll pick this thread up again, the ones that get fixed the fastest are
the ones that we can easily reproduce. The rest need a lot of think
time.
-chris
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html