On Wed, Nov 01, 2017 at 06:01:23PM -0600, Liu Bo wrote:
> This is to reproduce a raid6 reconstruction bug after two drives
> getting offline and online via hotplug.
>
> Signed-off-by: James Alandt <james.ala...@wdc.com>
> Signed-off-by: Liu Bo <bo.li....@oracle.com>
I don't have 5 deletable pool devices to actually test this patch, but
just comment issues I can see from the code.
> ---
> tests/btrfs/152 | 121
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/group | 1 +
> 2 files changed, 122 insertions(+)
> create mode 100755 tests/btrfs/152
>
> diff --git a/tests/btrfs/152 b/tests/btrfs/152
> new file mode 100755
> index 0000000..2b3d98c
> --- /dev/null
> +++ b/tests/btrfs/152
> @@ -0,0 +1,121 @@
> +#! /bin/bash
> +# FS QA Test 152
> +#
> +# This test is to reproduce a bug of btrfs raid6 reconstruction.
Better to provide more information about the bug and how would you like
to test it, it helps others to understand the bug and test, also it will
be helpful to debug test failure if it fails, say 5 years later.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Oracle. All Rights Reserved.
> +# Author: Liu Bo <bo.li....@oracle.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> + if [ $removed == 1 ]; then
$removed -eq 1 looks better
> + _scratch_umount
> + _devmgt_add ${disk1_remove}
> + _devmgt_add ${disk2_remove}
> + fi
Better to initialize all the variables used here before _cleanup.
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_scratch_nocheck
Above two _requires are not needed.
> +_require_scratch_dev_pool 5
Because you have this one.
> +_require_deletable_scratch_dev_pool
> +
> +# umount test so that we can unload btrfs module
> +_test_unmount
> +_require_btrfs_loadable
Perhaps you can take use of the new helpers introduced by Darrick's
pending patch "fstests: add module reloading helpers" (you can find the
patch in list), and with new helpers you don't have to umount test dev
before "_require_loadable_fs_module btrfs", which will be the
replacement of _require_btrfs_loadable.
> +
> +_scratch_dev_pool_get 5
> +
> +devs=( $SCRATCH_DEV_POOL )
> +n=${#devs[@]}
> +
> +mkfs_opts="-draid6 -mraid6 -n64K -b 1G"
> +_scratch_pool_mkfs $mkfs_opts >> $seqres.full 2>&1
> +
> +_scratch_mount -o nospace_cache
Please comment any non-obvious & non-default mkfs/mount options like
-n64k, -o nospace_cache :)
> +
> +# 1st 4k write
> +$XFS_IO_PROG -f -c "pwrite -W 0 4K" $SCRATCH_MNT/f1 | _filter_xfs_io
> +sync
No need to sync with "-W" pwrite.
> +
> +# hotplug disk1
> +disk1=${devs[$((n-1))]}
> +disk1_short=`_short_dev ${disk1}`
> +disk1_remove=`readlink -f /sys/block/${disk1_short} | rev | cut -d "/" -f 3
> | rev`
Factor this into a common function? I see similar code in btrfs/003 to
do the same task.
> +_devmgt_remove ${disk1_remove} $disk1_short
> +removed=1
> +
> +# 2nd 4K write
> +$XFS_IO_PROG -f -c "pwrite -W 0 4K" $SCRATCH_MNT/f2 | _filter_xfs_io
> +sync
Same here (and other places below), sync not needed.
> +
> +# hotplug disk2
> +disk2=${devs[$((n-2))]}
> +disk2_short=`_short_dev ${disk2}`
> +disk2_remove=`readlink -f /sys/block/${disk2_short} | rev | cut -d "/" -f 3
> | rev`
> +_devmgt_remove ${disk2_remove} $disk2_short
> +removed=1
> +
> +# 3rd 4K write
> +$XFS_IO_PROG -f -c "pwrite -W 0 4K" $SCRATCH_MNT/f3 | _filter_xfs_io
> +sync
> +
> +_scratch_unmount
> +
> +# bring disk1 & disk2 online
> +_devmgt_add ${disk1_remove}
> +_devmgt_add ${disk2_remove}
> +removed=0
> +
> +# reload the module to simulate 'reboot'
> +_reload_btrfs_ko
With the new helper, this should be "_reload_fs_module btrfs"
> +
> +# have every disk available for btrfs
> +btrfs dev scan
$BTRFS_UTIL_PROG device scan
Use full btrfs command name, e.g. dev->device, subvol->subvolume.
> +
> +_scratch_mount -onospace_cache,degraded || _fail "mount
> -onospace_cache,degraded failed"
If we _fail here then we skip _scratch_dev_pool_put. So just print out a
message to break the golden output.
Thanks,
Eryu
> +
> +_scratch_dev_pool_put
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index a7ff7b0..1dbb66f 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -154,3 +154,4 @@
> 149 auto quick send compress
> 150 auto quick dangerous
> 151 auto quick
> +152 auto quick
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
