On 9/4/19 2:35 PM, Piotr Szymaniak wrote: > On Wed, Sep 04, 2019 at 08:18:09AM +0200, Edmund Urbani wrote: >> *snip* >> The timeout under /sys is 30 for all of them. >> >> I am not sure what you mean by SCT ERC value and where to look for that. >> Here's all the info smartctl gives me about sda: > Try: > smartctl -l scterc /dev/ice > > ie. one of my drives (also WD Red) outputs: > $ smartctl -l scterc /dev/sdb > smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.62] (local build) > Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org > > SCT Error Recovery Control: > Read: 70 (7.0 seconds) > Write: 70 (7.0 seconds) > > SCT ERC value should be lower then the value in /sys. > > > Best regards, > Piotr Szymaniak.
Ok, thanks. Mine also all have 7 seconds set. Kind regards, Edmund -- *Liland IT GmbH* Ferlach ● Wien ● München Tel: +43 463 220111 Tel: +49 89 458 15 940 off...@liland.com https://Liland.com <https://Liland.com> Copyright © 2019 Liland IT GmbH Diese Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese Email irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This email may contain confidential and/or privileged information. If you are not the intended recipient (or have received this email in error) please notify the sender immediately and destroy this email. Any unauthorised copying, disclosure or distribution of the material in this email is strictly forbidden.
