On 10/20, Georgi Djakov wrote: > Remove the hard-coded clock rate from the driver and set the XO > parent to the on-board XO oscillator that is defined in the DT. > > Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org> > --- > drivers/clk/qcom/gcc-msm8916.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c > index d0a0313d6bef..3c0668b12142 100644 > --- a/drivers/clk/qcom/gcc-msm8916.c > +++ b/drivers/clk/qcom/gcc-msm8916.c > @@ -3360,7 +3360,7 @@ static int gcc_msm8916_probe(struct platform_device > *pdev) > struct device *dev = &pdev->dev; > > /* Temporary until RPM clocks supported */ > - clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); > + clk = clk_register_fixed_factor(dev, "xo", "xo_board", 0, 1, 1);
Sorry, I'd prefer to not take any DT changes through clk tree if we can avoid it. So we need to write some code to figure out if the xo_board clock is present, and keep registering this clock as the root clk if it isn't there. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html