Hi Thank you for your feedback
> > From: Kuninori Morimoto <kuninori.morimoto...@renesas.com> > > Hmm… Something wrong with send-email settings? Nothing wrong. I would like to overwrite Author (Sender and Author are same though...) > > +#define priv_to_client(priv) (priv->client) > > to_client()? > > > +#define priv_to_dev(priv) (&(priv_to_client(priv)->dev)) > > to_dev() ? I would like to have "from" > > +static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable) > > +{ > > + u32 val; > > + int ret; > > + > > + val = enable ? ENDEV1 : 0; > > Put in expression below? > > > + ret = cs2000_bset(priv, DEVICE_CFG1, ENDEV1, val); > > + if (ret < 0) > > + return ret; > > + > > + val = enable ? ENDEV2 : 0; > > Same. OK > > + if (rate_in >= 32000000 && > > + rate_in < 56000000) > > One line here and below? OK > > +static int cs2000_wait_pll_lock(struct cs2000_priv *priv) > > +{ > > + struct device *dev = priv_to_dev(priv); > > + s32 val; > > + unsigned int i; > > + > > + for (i = 0; i < 256; i++) { > > + val = cs2000_read(priv, DEVICE_CTRL); > > + if (val < 0) > > + return val; > > + if (!(val & PLL_UNLOCK)) > > + return 0; > > + udelay(1); > > + } > > unsigned int i = 256; > > do { > val = read(); > … > while ((val & PLL_UNLOCK) && --i); > > if (!i) { > … > return -EIO; > > Actually -ETIMEDOUT ? > > } What is the motivation of above ? It needs "i" anyway ? it needs to check (val < 0) anyway ? what is the difference between do {} while <-> for(xxx) > > +static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable) > > +{ > > + u32 val = enable ? 0 : 0x3; > > Redundant variable? OK > > +static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out) > > +{ > > + u64 ratio; > > + > > + /* > > + * ratio = rate_out / rate_in * 2^20 > > + * > > + * To avoid over flow, rate_out is u64 > > + * The result should be u32 > > + */ > > + ratio = (u64)rate_out << 20; > > + do_div(ratio, rate_in); > > + > > + return (u32)ratio; > > No need to do explicit casting. > > > +} > > + > > +static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in) > > +{ > > + u64 rate_out; > > + > > + /* > > + * ratio = rate_out / rate_in * 2^20 > > + * > > + * To avoid over flow, rate_out is u64 > > + * The result should be u32 > > u32 or unsigned long? > > Btw, dots at the end of sentences. > > > + */ > > + > > + rate_out = (u64)ratio * rate_in; > > + return (unsigned long)(rate_out >> 20); > > Same. OK > > +static int cs2000_ratio_set(struct cs2000_priv *priv, > > + int ch, u32 rate_in, u32 rate_out) > > +{ > > + u32 val; > > + unsigned int i; > > + int ret; > > + > > + if (CH_SIZE_ERR(ch)) > > + return -EINVAL; > > + > > + val = cs2000_rate_to_ratio(rate_in, rate_out); > > + for (i = 0; i < 4; i++) > > 4 is magic, you have define already. OK > > + /* > > + * FIXME > > + * > > + * this driver supports static ratio mode only > > + * at this point > > + */ > > One line? OK > > +static int cs2000_clk_register(struct cs2000_priv *priv) > > +{ > > + struct device *dev = priv_to_dev(priv); > > + struct device_node *np = dev->of_node; > > + struct clk_init_data init; > > + const char *name = np->name; > > + struct clk *clk; > > + static const char *parent_names[CLK_MAX]; > > + int ch = 0; /* it uses ch0 only at this point */ > > + int rate; > > + int ret; > > + > > + of_property_read_string(np, "clock-output-names", &name); > > What about device property API? Sorry, which API ? Many other clk-xxx.c are using this style ? > > +static int cs2000_version_print(struct cs2000_priv *priv) > > +{ > > + struct i2c_client *client = priv_to_client(priv); > > + struct device *dev = &client->dev; > > + s32 val = cs2000_read(priv, DEVICE_ID); > > + const char *revision; > > + > > Move read here to see how val is assigned. > > s32 val; > > … > > val = read(); > > > + if (val < 0) > > + return val; > > + > > + /* CS2000 should be 0x0 */ > > + if (0 != (val >> 3)) > > if (val >> 3) > > > + return -EIO; > > + > > + switch (val & 0x7) { > > magic > > > + case 0x4: > > magic > > > + revision = "B2 / B3"; > > + break; > > + case 0x6: > > magic OK -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html