Hi Jeff
Many Thanks for your reply.
I have had a look to see if there if there is anything suspicious within
dmesg and within messages and unfortunately there isn't anything at all
apart from one timeout.
Jul 8 10:15:51 loadbalancer-01 nanny[5427]: [inactive] shutting down
192.168.10.36:80 due to connection failure
Jul 8 10:16:03 loadbalancer-01 nanny[5427]: [ active ] making
192.168.10.36:80 available
I'll check out the possibility of any network related issues which may
cause this problem though.
Thanks for all your help!
R.
Jeff Sturm wrote:
Hi Raymond,
At those concurrency levels I would suspect network tuning may help.
Does dmesg show anything interesting on the load balancers during your
testing?
For high levels of concurrency on a NAT'd firewall or load balancer I
specifically remember having to adjust ip_conntrack_max upwards.
Perhaps network buffers as well.
-Jeff
-----Original Message-----
From: linux-cluster-boun...@redhat.com
[mailto:linux-cluster-boun...@redhat.com]
On Behalf Of Raymond Setchfield
Sent: Tuesday, July 07, 2009 8:35 AM
To: linux-cluster@redhat.com
Subject: [Linux-cluster] Trying to locate the bottleneck
Hi
I am trying to find a problem here with a setup which I am currently
testing.
This is the current setup which I have at the moment
15 web farm servers which are running vhost-ldap module and also have
ldap caching enabled. Which are behind 2 Load balancer servers which
are
in fail over. The software which it is currently running is Piranha on
the load balancers.
I am using siege to get some benchmarking done on these to test
basically their availability when pushing high concurrency.
At 100 (99.60 according to siege) Concurrent Connection it appears to
be
all ok with 99.89%. At 120 (119.52 according to siege) Concurrent
connections I get 99.9%, and at 130 (129.51 according to siege)
Concurrent Connections I get 100% availability.
However pushing it any further than this, for example 150 concurrent
connections it is falling over and siege bails out with multiple
connection time outs. I am trying to find the bottle neck here and I
am
wondering if it is software which I am using for the load balancers or
a
limitation with apache.
The command I am using for siege is pretty simple nothing special;
siege --concurrent=150 --internet --file=urls.txt --benchmark
--time=60M
My lvs.cf file can be found here to show you guys the config which I
am
using.
http://pastebin.com/m52d6cc23
Any help would be greatly appreciated
Many Thanks
R.
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
