hi, would like to know if anyone has configured successfully fence_scsi with mpio and emc clariion.
we are getting a new storage (emc vmax) and i would like to know if fence_scsi is usable in productive environment. thanks and greetings Daniel Barmenia Versicherungen Abt. IT-Betrieb Datenbank- & Systemadministration Kronprinzenallee 12-18 42119 Wuppertal E-Mail: [email protected] Internet: http://barmenia.de Telefon: +49 202 / 438 3195 Telefax: +49 202 / 438 03 3195 "Moralejo, Alfredo" <[email protected]> Gesendet von: [email protected] 11.06.2009 00:29 Bitte antworten an linux clustering <[email protected]> An linux clustering <[email protected]> Kopie Thema RE: [Linux-cluster] fence_scsi support in multipath env in RHEL5.3 [Virenprüfung durchgeführt] I'm using the config provide by Red Hat by default: device { vendor "DGC" product ".*" product_blacklist "LUN_Z" getuid_callout "/sbin/scsi_id -g -u -s /block/%n" prio_callout "/sbin/mpath_prio_emc /dev/%n" features "1 queue_if_no_path" hardware_handler "1 emc" path_grouping_policy group_by_prio failback immediate rr_weight uniform no_path_retry 300 rr_min_io 1000 path_checker emc_clariion } -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ryan O'Hara Sent: Thursday, June 11, 2009 12:11 AM To: linux clustering Subject: Re: [Linux-cluster] fence_scsi support in multipath env in RHEL5.3 On Wed, Jun 10, 2009 at 11:33:14PM +0200, Moralejo, Alfredo wrote: > Anyone is successfully using it? What path checker are you using? I've heard that certain path checkers cause problems, but I honestly don't know enough about dm-multipath to understand the reason for this. I have successfully used it with RDAC. Ryan > I'm testing it with a clariion storage frame on RHEL 5.3, and as soon as I enable scsi_reserve, multipath starts failing and a path goes good and bad in a loop and scsi fencing fails sometimes, should I configure in a specific way multipath.conf?: > > Jun 10 23:31:58 rmamseslab07 multipathd: mpath0: remaining active paths: 3 > Jun 10 23:32:00 rmamseslab07 kernel: sd 1:0:0:1: reservation conflict > Jun 10 23:32:00 rmamseslab07 kernel: sd 1:0:0:1: SCSI error: return code = 0x00000018 > Jun 10 23:32:00 rmamseslab07 kernel: end_request: I/O error, dev sdm, sector 79 > Jun 10 23:32:00 rmamseslab07 kernel: device-mapper: multipath: Failing path 8:192. > Jun 10 23:32:00 rmamseslab07 multipathd: 8:192: mark as failed > Jun 10 23:32:00 rmamseslab07 multipathd: mpathquorum: remaining active paths: 3 > Jun 10 23:32:00 rmamseslab07 multipathd: dm-10: add map (uevent) > Jun 10 23:32:00 rmamseslab07 multipathd: dm-10: devmap already registered > Jun 10 23:32:00 rmamseslab07 multipathd: sdm: emc_clariion_checker: Path healthy > Jun 10 23:32:00 rmamseslab07 multipathd: 8:192: reinstated > Jun 10 23:32:00 rmamseslab07 multipathd: mpathquorum: remaining active paths: 4 > Jun 10 23:32:00 rmamseslab07 multipathd: dm-10: add map (uevent) > Jun 10 23:32:00 rmamseslab07 multipathd: dm-10: devmap already registered > Jun 10 23:32:02 rmamseslab07 multipathd: sdl: emc_clariion_checker: Path healthy > Jun 10 23:32:02 rmamseslab07 multipathd: 8:176: reinstated > Jun 10 23:32:02 rmamseslab07 multipathd: mpath0: remaining active paths: 4 > Jun 10 23:32:02 rmamseslab07 multipathd: dm-9: add map (uevent) > Jun 10 23:32:02 rmamseslab07 multipathd: dm-9: devmap already registered > Jun 10 23:32:03 rmamseslab07 kernel: sd 1:0:0:0: reservation conflict > Jun 10 23:32:03 rmamseslab07 kernel: sd 1:0:0:0: SCSI error: return code = 0x00000018 > Jun 10 23:32:03 rmamseslab07 kernel: end_request: I/O error, dev sdl, sector 25256 > Jun 10 23:32:03 rmamseslab07 kernel: device-mapper: multipath: Failing path 8:176. > Jun 10 23:32:03 rmamseslab07 multipathd: dm-9: add map (uevent) > Jun 10 23:32:03 rmamseslab07 multipathd: dm-9: devmap already registered > Jun 10 23:32:03 rmamseslab07 multipathd: 8:176: mark as failed > Jun 10 23:32:03 rmamseslab07 multipathd: mpath0: remaining active paths: 3 > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Ryan O'Hara > Sent: Wednesday, June 10, 2009 9:18 PM > To: linux clustering > Subject: Re: [Linux-cluster] fence_scsi support in multipath env in RHEL5.3 > > On Wed, Jun 10, 2009 at 02:11:21PM +0530, Rajeev P wrote: > > I wanted to know if fence_scsi is supported in a multipath environment for > > RHEL5.3 release. > > Yes, it is supported. > > > In earlier releases of RHEL5 fence_scsi was not supported in a multipath > > environment for RHEL5.3 release. If I am not wrong, this was because the > > DM-MPIO driver forwarded the registration/unregistration commands on only on > > one of the physical paths of a LUN. Ideally it should have passed the > > commands on all physical paths. > > > > For RHEL5.3, is this issue resolved so that I can fence_scsi in multipath > > environment. > > > > Thanks in advance. > > > > Rajeev > > > -- > > Linux-cluster mailing list > > [email protected] > > https://www.redhat.com/mailman/listinfo/linux-cluster > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster ---------------------------------------------------------------------------------- Barmenia Krankenversicherung a. G. Vorstand: Dr. h. c. Josef Beutelmann (Vorsitzender) - Dr. Andreas Eurich - Norbert Lessmann - Heinz-Werner Richter - Martin Risse Aufsichtsrats-Vors.: Günter Völker; Rechtsform des Unternehmens: Versicherungsverein auf Gegenseitigkeit; Sitz: Wuppertal; Amtsgericht Wuppertal HRB 3871; St.-Nr. 132/5906/0047 ---------------------------------------------------------------------------------- Barmenia Allgemeine Versicherungs-AG Vorstand: Dr. h. c. Josef Beutelmann (Vorsitzender) - Dr. Andreas Eurich - Norbert Lessmann - Heinz-Werner Richter - Martin Risse Aufsichtsrats-Vors.: Günter Völker; Rechtsform des Unternehmens: Aktiengesellschaft; Sitz: Wuppertal; Amtsgericht Wuppertal HRB 3033; St.-Nr. 132/5906/0025 ---------------------------------------------------------------------------------- Barmenia Lebensversicherung a. G. Vorstand: Dr. h. c. Josef Beutelmann (Vorsitzender) - Dr. Andreas Eurich - Norbert Lessmann - Heinz-Werner Richter - Martin Risse Aufsichtsrats-Vors.: Günter Völker; Rechtsform des Unternehmens: Versicherungsverein auf Gegenseitigkeit; Sitz: Wuppertal; Amtsgericht Wuppertal HRB 3854; St.-Nr. 132/5906/0058
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
