Hello,
I have a cluster 3 on 2 x F11 x86_64 nodes.
main components are:
fence-agents-3.0.0-14.fc11.x86_64
clusterlib-3.0.0-20.fc11.x86_64
resource-agents-3.0.0-12.fc11.noarch
lvm2-cluster-2.02.48-2.fc11.x86_64
modcluster-0.16.1-1.fc11.x86_64
corosynclib-1.0.0-1.fc11.x86_64
cman-3.0.0-20.fc11.x86_64
corosync-1.0.0-1.fc11.x86_64
rgmanager-3.0.0-20.fc11.x86_64
It seems that on both nodes modclusterd is not able to start
with this log in /var/log/clumond.log
Mon Aug 3 17:04:31 2009 clumond: started
Mon Aug 3 17:04:31 2009 clumond: unhandled exception in main():
ServerSocket(port=16851): socket() failed: Address family not
supported by protocol
Mon Aug 3 17:04:31 2009 clumond: died
If I try to manual restart it (with cman, rgmanager, ricci aleady
started and up), I get:
[root ~]# service modclusterd start
Starting Cluster Module - cluster monitor: Setting verbosity level to LogBasic
[FAILED]
Is this service supposed to start automatically (aka chkconfiged on)
in cluster 3?
In rh 5.3 my chkconfig situation is this:
cman 0:off 1:off 2:on 3:on 4:on 5:on 6:off
modclusterd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
openais 0:off 1:off 2:off 3:off 4:off 5:off 6:off
qdiskd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rgmanager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
ricci 0:off 1:off 2:on 3:on 4:on 5:on 6:off
and when I have it:
clvmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
So that when I have to do maintenance on a node, leaving it open but
without cluster infrastructure active I do :
1) eventual relocation of active services
2) stop of related services:
service modclusterd stop
service rgmanager stop
service ricci stop
service clvmd stop (if present)
service qdiskd stop
service cman stop
At this moment in my F11 nodes I have the same chkconfig setup for
these services (apart from qdisk that I have not configured at the
moment).
Has been changed anything in startup scripts config setup?
Also,
Description for modclusterd init script:
# description: Starts and stops Ricci Cluster Module - cluster monitor
Description for ricci init script:
# description: Starts and stops Red Hat Cluster and Storage Remote \
# Configuration Interface (ricci)
Not very clear (at least to me) what are the relative functions of
these two services.
Thanks,
Gianluca
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
