On 05/13/2013 06:48 PM, emmanuel segura wrote:
Hello Delphine
your problem as you know is here
===============================================================
<fs device="LABEL=postfix" mountpoint="/var/spool/
postfix" force_unmount="1" fstype="ext3" name="mgmtha5" options=""/>
===============================================================
I don't know if you are using lvm or partition, but you should look for
the device corresponding to that LABEL, if you are using lvm use vgs and
lvs to see if your volume are actived
Thanks
Further to this:
- It is best-practice to use LVM resources (HA-LVM) for non-clustered
filesystems (ie. ext3, ext4, xfs, etc). This helps to protect against
accidentally mounting the filesystem on more than one node at a time.
As you have some GFS2, I assume you have clustered LVM and therefore it
is as simple as adding LVM resources to the services. See
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Cluster_Administration/ap-ha-halvm-CA.html#s1-halvm-clvm-CA
- The error you're experiencing where the service won't start is because
the filesystem with the label "postfix" can't be found (as Emmanuel
said). See if you can see the missing device with the following command:
# blkid -c /dev/null
If there is no device with LABEL=postfix, you need to try to find which
is the correct device, and add the label to the device with e2label.
Regards,
Ryan Mitchell
Red Hat Global Support Services
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
