mkqdisk -d -L
2014-02-17 10:42 GMT+01:00 Pavel Herrmann <[email protected]>: > Hello > > On Monday 17 of February 2014 10:25:32 FABIO FERRARI wrote: > > Yes, I know that if I have only 1 machine active the cluster won't start > > with this configuration. > > But this is not my problem. My problem is that the cluster was not > started > > even with 2 machines and the quorum disk active. > > There isn't any cluster.log in /var/log or in /var/log/cluster. Anyway, > as > > you can see, there isn't ANY log line in all cluster log files between > > 8:30 and 9:00 of 11th february. Only /var/log/messages has some logs > > during this period. > > (Don't consider the errors between 8:00 and 8:30 because the storage was > > not active. At about 9:00 we started the third machine so after this hour > > it was all ok.) > > > >... > > > > qdiskd.log > > Feb 07 17:41:52 qdiskd Unregistering quorum device. > > Feb 11 08:12:46 qdiskd Unable to match label 'mail-qdisk' to any device > > Feb 11 09:05:08 qdiskd Quorum Partition: /dev/block/253:0 Label: > mail-qdisk > > I am not an expert in this, but it seems you are using LVM volume as your > qdisk. > I would expect an issue with this, since LVM uses DLM, which in turn > depends > on qdisk > > This log seems to indicate that qdisk is not active untill the whole > cluster > is active, which basically defats its purpose > > Regards, > Pavel > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster > -- esta es mi vida e me la vivo hasta que dios quiera
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
