Hi,
I have setup a 2 node cluster using RHEL 6.5 .
The cluster .conf looks like this
<?xml version="1.0"?>
<cluster config_version="7" name="oracleha">
<cman expected_votes="1" two_node="1"/>
<fencedevices>
<fencedevice agent= "fence_ipmilan" ipaddr="10.10.63.93"
login="ADMIN" name="inspuripmi" passwd="XXXXX/>
<fencedevice agent = "fence_ilo2" ipaddr="10.10.63.92"
login="test" name="hpipmi" passwd="XXXXX"/>
</fencedevices>
<fence_daemon post_fail_delay="0" post_join_delay="60"/>
<clusternodes>
<clusternode name= "192.168.10.10" nodeid="1" >
<fence>
<method name = "1">
<device lanplus = "" name="inspuripmi" action ="reboot"/>
</method>
</fence>
</clusternode>
<clusternode name = "192.168.10.11" nodeid="2">
<fence>
<method name = "1">
<device lanplus = "" name="hpipmi" action ="reboot"/>
</method>
</fence>
</clusternode>
</clusternodes>
<rm>
<failoverdomains/>
<resources/>
<service autostart="1" exclusive="0" name="IP" recovery="relocate">
<ip address="10.10.5.23" monitor_link="on" sleeptime="10"/>
</service>
</rm>
</cluster>
The network is as follows:
1)Heartbeat (Bonding) between node 1 and node 2 using ethernet cables
The ip addresses are 192.168.10.11 and 192.168.10.10 for node 1 and node 2.
2) IPMI. This is used for fencing and addresses are 10.10.63.93 and
10.10.63.92
3) External ethernet connected to 10.10.5.x network.
If i do fence_node <ipaddress>, then fencing works,
However if i physically shutdown active node, the passive node also
shutdowns. Even if i do ifdown bond0 (on active node), both node shutdown
and have to be physically rebooted.
Any thing i am doing wrong ?
--
Linux-cluster mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-cluster
