hmm.., I have a Philips 107s with (30-70 kHz horizontal freq. & 50-160
vertical)..Here's some info from my XF86Config..(I'm helping you
because I spent almost 2 days searching for the resolution & refresh I
wanted...:)
First I took the horizSync to 71: HorizSync 30-71,
the rest is self-explanatory...,read the install-guide-3.2.html from the
ldp project (X config section)
Section "Monitor"
Identifier "Philips 107S (CM2300)"
VendorName "Philips Corp."
ModelName "Philips 107S (17inch/CM 2300)"
##----## 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 660 756 832 480 484 490 518
-HSync -VSync
##----## 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 856 920 1052 600 604 610 648
-HSync -VSync
##----## 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync
-VSync
Those do the job for my 107s..Maybe it's workin' with 107e too. I have a
Ati with 2megs SGRAM..so 1024x768x16bpp it's ok for me now.
also
# **********************************************************************
# Screen sections
# **********************************************************************
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
Mach64)
Section "Screen"
Driver "accel"
Device "ATI 3D Xpression+ PC2TV"
Monitor "Philips 107S (CM2300)"
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
michael
