Jivin Eran Ben-Avi lays it down ...
> > Jivin Eran Ben-Avi lays it down ...
> > > Hi,
> > >
> > > I tested IPSec(tunnel mode) routing performance
> > between 2 GbE ports using packet generator(SMARTBIT)
> > on ARM 500MHz with latest OCF patched on
> > Openswan2.4.9 and I noticed the callback functions
> > are using workqueue.
> > > Since RX was performed in NAPI mode with higher
> > priority then TX (in workqueue), the callback
> > function(in ipsec_ocf.c) was starved with zero
> > routing.
> > > The problem was solved after I switched to use
> > tasklet instead of the workqueue.
> > > Is there a room for updating next OCF release ?
> >
> > Sure, send in a patch. This is against
> > ocf-linux-20070727 right ?
> Yes.
> Can you please estimate when next release will be
> ready?
I can probably do one in about a week (offline next week). I could more
easily drop a diff since the last release if that helps you out.
I have made a few small changes to your patch so it should be safe on
2.4 systems yet still select tasklets on 2.6 automatically.
Could you have a look at it ? I have done some basic testing here
and it seems ok, haven't checked your performance increases yet ;-)
Thanks,
Davidm
--
David McCullough, [EMAIL PROTECTED], Ph:+61 734352815
Secure Computing - SnapGear http://www.uCdot.org http://www.cyberguard.com
Index: openswan/linux/include/openswan/ipsec_rcv.h
===================================================================
RCS file: openswan/linux/include/openswan/ipsec_rcv.h,v
retrieving revision 1.13
diff -u -r1.13 ipsec_rcv.h
--- openswan/linux/include/openswan/ipsec_rcv.h 26 Jun 2007 06:28:52 -0000 1.13
+++ openswan/linux/include/openswan/ipsec_rcv.h 26 Sep 2007 14:17:25 -0000
@@ -149,6 +149,9 @@
#ifdef CONFIG_KLIPS_OCF
struct work_struct workq;
+#ifdef DECLARE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
#endif
#ifndef NET_21
struct net_device *devp;
Index: openswan/linux/include/openswan/ipsec_xmit.h
===================================================================
RCS file: openswan/linux/include/openswan/ipsec_xmit.h,v
retrieving revision 1.9
diff -u -r1.9 ipsec_xmit.h
--- openswan/linux/include/openswan/ipsec_xmit.h 26 Jun 2007 05:26:25 -0000 1.9
+++ openswan/linux/include/openswan/ipsec_xmit.h 26 Sep 2007 14:17:25 -0000
@@ -140,6 +140,9 @@
int next_state;
#ifdef CONFIG_KLIPS_OCF
struct work_struct workq;
+#ifdef DECLARE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
#endif
#ifdef CONFIG_KLIPS_ALG
struct ipsec_alg_auth *ixt_a;
Index: openswan/linux/net/ipsec/ipsec_ocf.c
===================================================================
RCS file: openswan/linux/net/ipsec/ipsec_ocf.c,v
retrieving revision 1.27
diff -u -r1.27 ipsec_ocf.c
--- openswan/linux/net/ipsec/ipsec_ocf.c 11 Jul 2007 00:35:01 -0000 1.27
+++ openswan/linux/net/ipsec/ipsec_ocf.c 26 Sep 2007 14:17:25 -0000
@@ -56,7 +56,11 @@
#define USE_BATCH 1 /* enable batch mode */
#define USE_CBIMM 1 /* enable immediate callbacks */
#define FORCE_QS 0 /* force use of queues for continuation of state machine */
-
+#ifdef DECLARE_TASKLET
+#define USE_TASKLET 1 /* use tasklet for continuation of state machine */
+#else
+#define USE_TASKLET 0 /* don't use tasklet for continuation of state machine */
+#endif
/*
* Because some OCF operations are synchronous (ie., software encryption)
* we need to protect ourselves from distructive re-entry. All we do
@@ -83,15 +87,21 @@
(*sm)(arg); \
})
-#if FORCE_QS == 0
- #define PROCESS_NEXT(wq, wqsm, sm, arg) \
+#if USE_TASKLET == 1
+ #define PROCESS_NEXT(this, wqsm, sm) ({ \
+ tasklet_init(&this->tasklet, \
+ (void (*)(unsigned long)) sm, (unsigned long)this); \
+ tasklet_schedule(&this->tasklet); \
+ })
+#elif FORCE_QS == 0
+ #define PROCESS_NEXT(this, wqsm, sm) \
if (in_interrupt()) { \
- PROCESS_LATER(wq, wqsm, arg); \
+ PROCESS_LATER(this->workq, wqsm, this); \
} else { \
- PROCESS_NOW(sm, arg); \
+ PROCESS_NOW(sm, this); \
}
#else
- #define PROCESS_NEXT(wq, wqsm, sm, arg) PROCESS_LATER(wq, wqsm, arg)
+ #define PROCESS_NEXT(this, wqsm, sm) PROCESS_LATER(this->workq, wqsm, this)
#endif
/*
@@ -218,6 +228,7 @@
return 1;
}
+#if USE_TASKLET == 0
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
static void
ipsec_rsm_wq(struct work_struct *work)
@@ -228,6 +239,7 @@
#else
#define ipsec_rsm_wq ipsec_rsm
#endif
+#endif /* USE_TASKLET */
static int
ipsec_ocf_rcv_cb(struct cryptop *crp)
@@ -235,7 +247,6 @@
struct ipsec_rcv_state *irs = (struct ipsec_rcv_state *)crp->crp_opaque;
KLIPS_PRINT(debug_rcv, "klips_debug:ipsec_ocf_rcv_cb\n");
-
if (irs == NULL) {
KLIPS_PRINT(debug_rcv, "klips_debug:ipsec_ocf_rcv_cb: "
"NULL irs in callback\n");
@@ -273,7 +284,7 @@
crp = NULL;
/* setup the rest of the processing now */
- PROCESS_NEXT(irs->workq, ipsec_rsm_wq, ipsec_rsm, irs);
+ PROCESS_NEXT(irs, ipsec_rsm_wq, ipsec_rsm);
return 0;
}
@@ -396,6 +407,7 @@
return(IPSEC_RCV_PENDING);
}
+#if USE_TASKLET == 0
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
static void
ipsec_xsm_wq(struct work_struct *work)
@@ -406,6 +418,7 @@
#else
#define ipsec_xsm_wq ipsec_xsm
#endif
+#endif /* USE_TASKLET */
static int
ipsec_ocf_xmit_cb(struct cryptop *crp)
@@ -445,7 +458,7 @@
crp = NULL;
/* setup the rest of the processing now */
- PROCESS_NEXT(ixs->workq, ipsec_xsm_wq, ipsec_xsm, ixs);
+ PROCESS_NEXT(ixs, ipsec_xsm_wq, ipsec_xsm);
return 0;
}
