On Wednesday, June 10, 2015 11:08:51 AM Suravee Suthikulpanit wrote: > This patch series introduce support for _CCA object, which is currently > used mainly by ARM64 platform to specify DMA coherency attribute for > devices when booting with ACPI. > > A copy of ACPIv6 can be found here: > http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf > > This patch also introduces a new APIS: > 1. acpi_check_dma() as part of ACPI API. > 2. device_dma_is_coherent() as part of unified device property API. > > This simplifies the logic in device drivers to determine device coherency > attribute regardless of booting with DT vs ACPI. > > This has been tested on AMD-Seattle platform, which implements _CCA > object as described in the AMD Opteron A1100 Series Processor ACPI Porting > Guide: > > http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf > > Changes from V5 (https://lkml.org/lkml/2015/5/20/1033): > * Fix build error in the megaraid and ufs driver > (reported by Mark Salter) > > Changes from V4 (https://lkml.org/lkml/2015/5/15/669): > * Patch1: > - Move the arch_setup_dma_ops() call from acpi_create_platform_device() > to acpi_bind_one() to support other bus types (per Rafael). > - Rename acpi_device_flags.is_coherent to > acpi_device_flags.coherent_dma. > (per Rafael) > - Refactor acpi_dma_is_supported() and acpi_dma_is_coherent() to > acpi_check_dma() to simplify the new interface. > - Only support _CCA=1 for now. See acpi_check_dma() (per Arnd and > Catalin) > * Patch2: > - Add acked-by Catalin. > * Patch3: > - Use ACPI_COMPANION() instead of acpi_node(). > - Remove has_acpi_companion() check since already done by acpi_node(). > (per Will) > * Remove the patch "Generic function for setting up PCI device DMA > coherency" > introduced in V4. (per Bjorn) > > Changes from V3 (https://lkml.org/lkml/2015/5/7/1004): > * Remove ARCH64_SUPPORT_ACPI_CCA_ZERO and just use CONFIG_ARM64. > (per Catalin and Rafael) > * Do not need to call arch_setup_dma_ops() for acpi_device->dev. > (per Rafael) > * [3/6] (New) We also need to call arch_setup_dma_ops() for pci > devices and check the CCA of the host bridge. Similar logic > exists for OF. So, I refactor of_pci_dma_configure() to > the more generic version pci_dma_configure(), and add support > for ACPI. > > Changes from V2 (https://lkml.org/lkml/2015/5/5/510): > * Reword ACPI_MUST_HAVE_CCA to ACPI_CCA_REQUIRED (per Rafael) > * Reword ACPI_SUPPORT_CCA_ZERO to ARCH64_SUPPORT_ACPI_CCA_ZERO > (per Rafael and Arnd) > * Misc code styling clean up (per Rafael) > * Only print missing _CCA warning message in debug mode. > * Refactor logic in acpi_setup_device_dma() into > if acpi_dma_is_supported() then call arch_setup_dma_ops(). > * Do not allocate device dma_mask if !acpi_dma_is_supported() > (per Arnd). > * Re-use the dummy functions with the same signature. > > Changes from V1 (https://lkml.org/lkml/2015/4/29/290): > * Remove supports for 32-bit ARM since doesn't currently > supporting ACPI (Per Catalin suggestions.) > * Do not call arch_setup_dma_ops() and when _CCA is missing. > (per Arnd suggestion) > * Add CONFIG_ACPI_SUPPORT_CCA_ZERO kernel config flag to > allow architectures to specify the behavior when _CCA=0. > * Add dummy_dma_ops for ARM64 (per Catalin suggestions). > * Fixed build error when ACPI is not configured by defining > acpi_dma_is_coherent() for when CONFIG_ACPI is not set. > * Introduce device_dma_is_coherent(). > * Use device_dma_is_coherent in crypto/ccp and amd-xgbe driver. > > Changes from RFC: (https://lkml.org/lkml/2015/4/1/389) > * New logic for deriving and propagating coherent attribute from > parent devices. (by Mark) > * Introducing acpi_dma_is_coherent() API (Per Tom suggestion) > * Introducing CONFIG_ACPI_MUST_HAVE_CCA kernel configuration. > * Rebased to linux-4.1-rc1 > > Suravee Suthikulpanit (7): > ACPI / scan: Parse _CCA and setup device coherency > arm64 : Introduce support for ACPI _CCA object > device property: Introduces device_dma_is_coherent() > crypto: ccp - Unify coherency checking logic with > device_dma_is_coherent() > amd-xgbe: Unify coherency checking logic with device_dma_is_coherent() > megaraid_sas: fix TRUE and FALSE re-define build error > ufs: fix TRUE and FALSE re-define build error > > arch/arm64/Kconfig | 1 + > arch/arm64/include/asm/dma-mapping.h | 18 +++++- > arch/arm64/mm/dma-mapping.c | 92 > +++++++++++++++++++++++++++++++ > drivers/acpi/Kconfig | 3 + > drivers/acpi/acpi_platform.c | 2 +- > drivers/acpi/glue.c | 5 ++ > drivers/acpi/scan.c | 35 ++++++++++++ > drivers/base/property.c | 14 +++++ > drivers/crypto/ccp/ccp-platform.c | 60 +------------------- > drivers/net/ethernet/amd/xgbe/xgbe-main.c | 27 +-------- > drivers/scsi/megaraid/megaraid_sas_fp.c | 8 +++ > drivers/scsi/ufs/unipro.h | 8 +++ > include/acpi/acpi_bus.h | 37 ++++++++++++- > include/linux/acpi.h | 5 ++ > include/linux/property.h | 2 + > 15 files changed, 228 insertions(+), 89 deletions(-)
I've queued up the series for 4.2, thanks! -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html