On 7/4/2018 5:44 AM, Vinod Koul wrote:
From: Timur Tabi <ti...@codeaurora.org>

Add support for probing on ACPI systems, with ACPI HID QCOM8160.

On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.

Signed-off-by: Timur Tabi <ti...@codeaurora.org>
[port to crypto API]
Signed-off-by: Vinod Koul <vk...@kernel.org>

Tested-by: Jeffrey Hugo <jh...@codeaurora.org>

---
  drivers/crypto/qcom-rng.c | 30 ++++++++++++++++++++++++++----
  1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index f1bd86acaf9d..385352e200db 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
  // Based on msm-rng.c and downstream driver
#include <crypto/internal/rng.h>
+#include <linux/acpi.h>
  #include <linux/clk.h>
  #include <linux/crypto.h>
  #include <linux/module.h>
@@ -168,11 +169,21 @@ static int qcom_rng_probe(struct platform_device *pdev)
        if (IS_ERR(rng->base))
                return PTR_ERR(rng->base);
- rng->clk = devm_clk_get(&pdev->dev, "core");
-       if (IS_ERR(rng->clk))
-               return PTR_ERR(rng->clk);
- rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+       /*
+        * ACPI systems have v2 hardware. The clocks are always enabled,
+        * and we should skip init
+        */
+       if (has_acpi_companion(&pdev->dev)) {
+               rng->skip_init = 1;
+       } else {
+               rng->clk = devm_clk_get(&pdev->dev, "core");
+               if (IS_ERR(rng->clk))
+                       return PTR_ERR(rng->clk);
+
+               rng->skip_init =
+                       (unsigned long)of_device_get_match_data(&pdev->dev);
+       }
qcom_rng_dev = rng;
        ret = crypto_register_rng(&qcom_rng_alg);
@@ -193,6 +204,16 @@ static int qcom_rng_remove(struct platform_device *pdev)
        return 0;
  }
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+       {
+               .id = "QCOM8160",
+       },
+       {}
+};
+MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
+#endif
+
  static const struct of_device_id qcom_rng_of_match[] = {
        { .compatible = "qcom,prng", .data = (void *)0},
        { .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +227,7 @@ static struct platform_driver qcom_rng_driver = {
        .driver = {
                .name = KBUILD_MODNAME,
                .of_match_table = of_match_ptr(qcom_rng_of_match),
+               .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
        }
  };
  module_platform_driver(qcom_rng_driver);



--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

Reply via email to