HI all,
Well, I finally have the dial up working the last part of the problem is
that I get
the error cannot determine etho address for proxy arp. But it still lets
this machice out to the internet what could be the problem with the
connection or setup about the proxy arp?
Thanks
Joe Wronkowski
At 11:32 AM 8/3/98 -0400, you wrote:
>Hi all,
>I am new to this list and have just installed diald with the patch to 16.5.
>I installed in its default configuration using the /etc/diald.conf and then
>usr/lib/diald holds the other files. I created a diald.conf from the
>examples in the docs. I can hear the modem initiate and call out but then
>becomes disconnected after a minute or so. I thought I saw somewhere where
>it logged to the /var/log/ppp.log so I can see what is going on however. I
>can't find the ppp.log. The only other file I made changes to is the
>connect file. belows is a copy of the diald.conf file and my connect file.
>Also My end result once I accomplish getting one to dial is to get two
>modems to connect so I can use the bandwith. If anyone has any experiece
>with multilinking with linux could you please send me an email. I have a
>couple of questions, my ultimate goal is, I have 3 computers and am trying
>to use the linux box as my gateway to the internet for my computers. So I
>am working on first getting the ppp conection situated.
>
>diald.conf
>mode ppp
>accounting-log /var/log/diald.log
>#fifo /usr/lig/diald/diald.ctl
>connect /usr/lib/diald/connect
>device /dev/ttyS3
>speed 115200
>modem
>debug
>lock
>crtscts
>local 192.168.0.6
>remote 205.227.158.8
>dynamic
>defaultroute
>include /usr/lib/diald/standard.filter
>~
> connect is the standard connect except I did remember to change the user
>and pass to my real ones. :>
>
>Thanks in advance
>Joe
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-diald" in
>the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
