If what you say is correct then this must be the very best bit of advice I have seen yet on this list!!!!!!!!!!!!!!! I have aged about 120 years in the time I have tried to get the standard diald working ... I have had to make do with an old RPM! I am now going to rebuild my box and give it a try!! Cheers Iain -----Original Message----- From: Andrew Beebe [SMTP:[EMAIL PROTECTED]] Sent: 03 March 1999 12:23 To: [EMAIL PROTECTED] Subject: Re: unable to compile under RedHat5.2 In order to compile Diald under a Red Hat 5.x, or any other glibc system, you have to apply the diald-patch first. Once you do this it should compile just fine. I've compiled diald on three RH 5.2 systems, and a couple RH 5.1 systems with out any problems. You can get the patch and instructions for applying it from the Diald homepage at: http://www.loonie.net/~eschenk/diald.html The file you want is "diald-patch-0.16.5.gz" which needs to be applied over the source for diald-0.16. -- Andy _________________________ Andrew R. Beebe Maine Web Design RR 2 Box 363 A Bridgton, ME 04009 (207) 647-8411 http://www.datamaine.com _________________________ - To unsubscribe from this list: send the line "unsubscribe linux-diald" in the body of a message to [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-diald" in the body of a message to [EMAIL PROTECTED]
