Hi,
I would like to use diald on my RH5.2 system, kernel 2.2.6. The connect
script basicly is the one of the diald distribution, I just changed the
number.
If I run ifup ppp0 it works - I get connection and internet access. Is
there any possibility to use this mechanism with diald???
Syslog sends following error:
Apr 24 12:16:19 rh52 diald[969]: Proxy device established on interface tap0
Apr 24 12:16:19 rh52 diald[969]: Diald initial setup completed.
Apr 24 12:16:21 rh52 diald[969]: Trigger: udp 192.168.2.1/1024
198.32.64.12/53
Apr 24 12:16:21 rh52 diald[969]: Calling site 192.168.2.2
Apr 24 12:16:22 rh52 connect: Initializing Modem
Apr 24 12:16:22 rh52 chat[980]: Can't get terminal parameters: Invalid
argument
Apr 24 12:16:22 rh52 connect: Failed to initialize modem
Apr 24 12:16:22 rh52 diald[969]: Connect script failed.
Apr 24 12:16:22 rh52 diald[969]: Closing /dev/ttyS1
Apr 24 12:16:23 rh52 diald[969]: Delaying 30 seconds before clear to dial.
Apr 24 12:16:53 rh52 diald[969]: Calling site 192.168.2.2
Apr 24 12:16:54 rh52 connect: Initializing Modem
Apr 24 12:16:54 rh52 chat[985]: Can't get terminal parameters: Invalid
argument
Apr 24 12:16:54 rh52 connect: Failed to initialize modem
Apr 24 12:16:54 rh52 diald[969]: Connect script failed.
Apr 24 12:16:54 rh52 diald[969]: Closing /dev/ttyS1
Apr 24 12:16:55 rh52 diald[969]: Delaying 30 seconds before clear to dial.
/etc/diald.conf
mode ppp
debug 31
# connect "/usr/sbin/chat -f /etc/sysconfig/network-scripts/chat-ppp0"
# connect "/usr/sbin/chat -f /etc/sysconfig/network-scripts/chat-ppp1"
connect "/opt/diald/lib/connect"
device /dev/ttyS1
speed 115200
modem
lock
crtscts
local 192.168.2.1
remote 192.168.2.2
mtu 576
dynamic
defaultroute
include /opt/diald/lib/diald.defs
include /opt/diald/lib/standard.filter
# --end /etc/diald.conf
/opt/diald/lib/connect:
#!/bin/sh
# Copyright (c) 1996, Eric Schenk.
#
# This script is intended to give an example of a connection script that
# uses the "message" facility of diald to communicate progress through
# the dialing process to a diald monitoring program such as dctrl or
diald-top.
# It also reports progress to the system logs. This can be useful if you
# are seeing failed attempts to connect and you want to know when and why
# they are failing.
#
# This script requires the use of chat-1.9 or greater for full
# functionality. It should work with older versions of chat,
# but it will not be able to report the reason for a connection failure.
# Configuration parameters
# The initialization string for your modem
MODEM_INIT="ATZ&C1&D2%C0"
# MODEM_INIT="ATZ"
# The phone number to dial
PHONE_NUMBER="0101901929"
# The chat sequence to recognize that the remote system
# is asking for your user name.
USER_CHAT_SEQ="name:--name:--name:--name:--name:--name:--name:"
# The string to send in response to the request for your user name.
USER_NAME="blubber"
# The chat sequence to recongnize that the remote system
# is asking for your password.
PASSWD_CHAT_SEQ="ssword:"
# The string to send in response to the request for your password.
PASSWORD="blubberle"
# The prompt the remote system will give once you are logged in
# If you do not define this then the script will assume that
# there is no command to be issued to start up the remote protocol.
PROMPT="annex:"
# The command to issue to start up the remote protocol
PROTOCOL_START="ppp"
# The string to wait for to see that the protocol on the remote
# end started OK. If this is empty then no check will be performed.
START_ACK="Switching to PPP."
# Pass a message on to diald and the system logs.
function message () {
[ $FIFO ] && echo "message $*" >$FIFO
logger -p local2.info -t connect "$*"
}
# Initialize the modem. Usually this just resets it.
message "Initializing Modem"
chat TIMEOUT 5 "" $MODEM_INIT TIMEOUT 45 OK ""
if [ $? != 0 ]; then
message "Failed to initialize modem"
exit 1
fi
# Dial the remote system.
message "Dialing system"
chat \
TIMEOUT 45 \
ABORT "NO CARRIER" \
ABORT BUSY \
ABORT "NO DIALTONE" \
ABORT ERROR \
"" AX3DT0,$PHONE_NUMBER \
CONNECT ""
case $? in
0) message Connected;;
1) message "Chat Error"; exit 1;;
2) message "Chat Script Error"; exit 1;;
3) message "Chat Timeout"; exit 1;;
4) message "No Carrier"; exit 1;;
5) message "Busy"; exit 1;;
6) message "No DialTone"; exit 1;;
7) message "Modem Error"; exit 1;;
*)
esac
# We're connected try to log in.
message "Loggin in"
chat \
TIMEOUT 5 \
$USER_CHAT_SEQ \\q$USER_NAME \
TIMEOUT 45 \
$PASSWD_CHAT_SEQ $PASSWORD
if [ $? != 0 ]; then
message "Failed to log in"
exit 1
fi
# We logged in, try to start up the protocol (provided that the
# user has specified how to do this)
if [ $PROMPT ]; then
message "Starting Comm Protocol"
chat TIMEOUT 15 $PROMPT $PROTOCOL_START
if [ $? != 0 ]; then
message "Prompt not received"
exit 1
fi
fi
if [ $START_ACK ]; then
chat TIMEOUT 15 $START_ACK ""
if [ $? != 0 ]; then
message "Failed to start Protocol"
exit 1
fi
fi
# Success!
message "Protocol started"
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
