Hello all.
I used diald for a while with RH5.2 & 2.0 series kernels right up to the
bitter end. For the last few months I had a DSL (boy was that cool) and
in the interim moved up to the 2.2 series kernels.
I have now moved & the new area doesn't have DSL or cable modems so I'm
back to a POTS connection. At this point I'm running RH6.0 with their
stock 2.2.5 kernel. I have ppp working fine (barring a few stange
messages) using ifup ppp0. syslog looks like so:
May 8 19:15:06 pearl ifup-ppp: pppd started for ppp0 on /dev/ttyS1 at
115200
May 8 19:15:06 pearl kernel: PPP: version 2.3.3 (demand dialling)
May 8 19:15:06 pearl kernel: PPP line discipline registered.
May 8 19:15:06 pearl kernel: registered device ppp0
May 8 19:15:06 pearl pppd[3099]: pppd 2.3.7 started by root, uid 0
May 8 19:15:29 pearl pppd[3099]: Serial connection established.
May 8 19:15:29 pearl pppd[3099]: Using interface ppp0
May 8 19:15:29 pearl pppd[3099]: Connect: ppp0 <--> /dev/ttyS1
May 8 19:15:33 pearl pppd[3099]: Remote message: ^F
May 8 19:15:33 pearl modprobe: can't locate module ppp-compress-21
May 8 19:15:34 pearl modprobe: can't locate module ppp-compress-26
May 8 19:15:34 pearl modprobe: can't locate module ppp-compress-24
May 8 19:15:34 pearl pppd[3099]: local IP address 151.197.###.##
May 8 19:15:34 pearl pppd[3099]: remote IP address 192.168.###.##
When I try to implement diald I get the following:
May 8 12:45:16 pearl diald[2656]: Running connect (pid = 2890).
May 8 12:45:16 pearl connect: Initializing Modem
May 8 12:45:17 pearl connect: Dialing 1610#######
May 8 12:45:22 pearl PAM_pwdb[2872]: (login) session opened for user
root by (uid=0)
May 8 12:45:38 pearl connect: chat: May 08 12:45:38 CONNECT 28800/ARQ
May 8 12:45:38 pearl connect: Protocol started
May 8 12:45:38 pearl diald[2656]: Running pppd (pid = 2914).
May 8 12:45:38 pearl pppd[2914]: pppd 2.3.7 started by root, uid 0
May 8 12:45:38 pearl pppd[2914]: Using interface ppp0
May 8 12:45:38 pearl pppd[2914]: Connect: ppp0 <--> /dev/ttyS1
May 8 12:45:42 pearl pppd[2914]: Hangup (SIGHUP)
May 8 12:45:42 pearl pppd[2914]: Modem hangup
May 8 12:45:42 pearl pppd[2914]: Connection terminated.
May 8 12:45:42 pearl pppd[2914]: Connect time 0.1 minutes.
May 8 12:45:42 pearl pppd[2914]: Exit.
May 8 12:45:42 pearl diald[2656]: Nonzero exit status (7) on command
'/sbin/route add 10.0.0.2 metric 1 dev sl0'
May 8 12:45:42 pearl diald[2656]: Nonzero exit status (7) on command
'/sbin/route add default metric 1 netmask 0.0.0.0 dev sl0'
May 8 12:45:42 pearl diald[2656]: Nonzero exit status (7) on command
'/sbin/route add 10.0.0.2 metric 1 dev sl0'
May 8 12:45:42 pearl diald[2656]: Nonzero exit status (7) on command
'/sbin/route add default metric 1 netmask 0.0.0.0 dev sl0'
May 8 12:45:43 pearl diald[2656]: Delaying 10 seconds before clear to
dial.
Is this a configuration issue or a kernel /route problem? any thoughts?
Thanks,
Joel
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
