Okay, people. I have spend all night trying to get 0.99.1 or 0.16.5 getting
to work on RH5.2 (2.0.36). I stopped on 0.16.5 because it dialed at least
when I called it "diald up". Yet it refuses to dial when I telnet or ping
something. It does not showup in "ps aux | grep diald" when I start it as
"diald &" but it does show up when I start it as "diald". Here is the dump
of my "route" when it is not connected:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.65.54.14 * 255.255.255.255 UH 1 0 0 sl1
10.65.54.14 * 255.255.255.255 UH 1 0 0 sl0
192.168.0.0 * 255.255.255.0 U 0 0 2 eth0
127.0.0.0 * 255.0.0.0 U 0 0 2 lo
default linux.homerubbe 0.0.0.0 UG 0 0 3 eth0
default * 0.0.0.0 U 1 0 0 sl1
default * 0.0.0.0 U 1 0 0 sl0
default * 0.0.0.0 U 1 0 0 sl1
default * 0.0.0.0 U 1 0 0 sl0
and here comes /etc/diald.conf
mode ppp
connect /etc/diald/connect
device /dev/modem
speed 38400
modem
lock
crtscts
local 216.164.68.x
remote 10.65.54.14
defaultroute
include /usr/lib/diald/standard.filter
What in the world would be wrong here?
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
