Ralph Clark wrote:
> "Adams, James" wrote:
>
> > Thanks Once Again,
> > I believe my single brain-cell is beginning to flicker. When I
> > installed the diald .99 tarball no configuration files were included. So if
> > Mr. Brain-Cell is correct, I could reinstall .99 then install the 0-16
> > config rpm and continue on from there? Or am I totally confused?
>
> ==========================================================================
> The "How To Upgrade From Diald-0.16 RPM Via Diald-0.99 Tarball" MINI-HOWTO
> ==========================================================================
Here's my abbreviated version:
0. login as root
1. You are using diald-0.16... Make copies of the currently used diald.defs,
diald.conf and all files "include"-ed by diald.conf.
2. place a copy of diald-0.99.1.tar.gz in /usr/src, then
cd /usr/src
tar -zxpvf diald-0.99.1.tar.gz
mv diald diald-0.99.1
cd diald-0.99.1
less README
3. edit Makefile and config.h; make sure directories used are the same as for your
dial-0.16 setup, then
make depend
make (there may be problems with here!)
make install
4. Read the following, and act accordingly (some of the options in diald.conf have
changed from 0.16 to 0.99). I found it necessary to add default routes in init and
firewall scripts, change the way masquerading was setup when the link was down, etc.
The documentation is dated and sloppy.
less README.masq
less README.ethertap
man diald
subscribe linux-diald
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
