Hi !
I have a strange message that occurs in the 'connect' script with diald.
This is the standard script from the diald-0.99.1 file, with just the
telephone number, userid and password set:
Sep 8 17:10:45 mirror diald[4308]: Trigger: tcp xxx.xxx.xxx.xxx/2597
194.217.242.56/25
Sep 8 17:10:45 mirror diald[4308]: Calling site 158.152.1.100
Sep 8 17:10:46 mirror connect: Initializing Modem
Sep 8 17:10:47 mirror connect: Dialing system
Sep 8 17:11:09 mirror connect: Connected
Sep 8 17:11:09 mirror connect: Logging in
Sep 8 17:11:12 mirror connect: Starting Comms Protocol
Sep 8 17:11:12 mirror diald[4308]: connector: /usr/lib/diald/connect: [: to:
binary operator expected
Sep 8 17:11:12 mirror diald[4308]: Connected to site 158.152.1.100
Sep 8 17:11:12 mirror diald[4308]: Running pppd (pid = 4937).
Sep 8 17:11:12 mirror connect: Protocol started
Sep 8 17:11:12 mirror pppd[4937]: pppd 2.3.7 started by dialout, uid 0
Sep 8 17:11:12 mirror pppd[4937]: Using interface ppp0
Sep 8 17:11:12 mirror pppd[4937]: Connect: ppp0 <--> /dev/ttyS0
Sep 8 17:11:15 mirror pppd[4937]: local IP address xxx.xxx.xxx.xxx
Sep 8 17:11:15 mirror pppd[4937]: remote IP address 158.152.1.222
Sep 8 17:11:16 mirror diald[4308]: start ppp0: SIOCSIFMETRIC: Operation not
supported
Why do I get the 'connector' message in the middle ? It only happens in a
small number of case, usually with SMTP triggers.
Jonathan
------------------------------------------------------------------------------
Jonathan Allen | [EMAIL PROTECTED] | Voice: 01271-379023
Barum Computer Consultants | | Fax: 01271-324183
------------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
