Dear listreaders,
I progressing in realising a diald/pppd
link.
Diald is now up and running with the
settings below.
when I ping,it starts dialing and makes a connection to my ISP.
Instead of a working connection I get a time out on my pppd.
(see the /var/log/messages below). In the conversation with my ISP
I ask for a ppp connection with my username (ppp.name). When I make the
connection with minicom or ifup ppp0, my ISP gives the local and remote
IP numbers.
when I ping,it starts dialing and makes a connection to my ISP.
Instead of a working connection I get a time out on my pppd.
(see the /var/log/messages below). In the conversation with my ISP
I ask for a ppp connection with my username (ppp.name). When I make the
connection with minicom or ifup ppp0, my ISP gives the local and remote
IP numbers.
Can you see what I am doing wrong?
How can I improve debugging?
How can I improve debugging?
Thank you in advance.
Ron Groen
The Netherlands
The Netherlands
after diald start:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.252 * 255.255.255.255 UH 0 0 0 sl0
192.168.0.252 * 255.255.255.255 UH 0 0 0 sl0
192.168.0.3 * 255.255.255.255 UH 0 0 0 eth0
192.168.0.0 192.168.0.3 255.255.255.0 UG 0 0 0 eth0
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default * 0.0.0.0 U 0 0 0 sl0
/var/log/messages:
Oct 16 17:30:37 quad diald[1160]: Using fifo /etc/diald/diald.ctl
Oct 16 17:30:38 quad modprobe: can't locate module tap0
...
Oct 16 17:30:41 quad modprobe: can't locate module tap15
Oct 16 17:30:41 quad diald[1160]: Proxy device established on interface sl0
Oct 16 17:30:41 quad diald[1160]: start sl0: SIOCSIFMETRIC: Operation not supported
Oct 16 17:30:42 quad diald[1160]: Diald initial setup completed.
Oct 16 17:31:03 quad diald[1160]: Trigger: udp 192.168.0.251/1193 193.78.240.12/53
Oct 16 17:31:03 quad diald[1160]: Calling site 192.168.0.252
Oct 16 17:31:05 quad chat[1183]: timeout set to 30 seconds
...
Oct 16 17:31:05 quad chat[1183]: send (^MATZ^M)
...
Oct 16 17:31:05 quad chat[1183]: send (rATDT071-7110810^M)
...
Oct 16 17:31:27 quad chat[1183]: CONNECT
Oct 16 17:31:27 quad chat[1183]: -- got it
Oct 16 17:31:27 quad chat[1183]: send (^M^M)
Oct 16 17:31:27 quad chat[1183]: expect (ogin:)
Oct 16 17:31:27 quad chat[1183]: 14400 EC^M
...
Oct 16 17:31:27 quad last message repeated 23 times
Oct 16 17:31:27 quad chat[1183]: UQKT2 tnt10.dial.ams3.nl.uu.net^M
...
Oct 16 17:31:27 quad chat[1183]: -- got it
Oct 16 17:31:27 quad chat[1183]: send (ppp:user@nlnet^M)
Oct 16 17:31:27 quad chat[1183]: expect (assword:)
Oct 16 17:31:27 quad chat[1183]: ^M
Oct 16 17:31:27 quad chat[1183]: Login: ppp:rgroe01@nlnet^M
Oct 16 17:31:27 quad chat[1183]: Password:
Oct 16 17:31:27 quad chat[1183]: -- got it
Oct 16 17:31:27 quad chat[1183]: send (password)
Oct 16 17:31:28 quad diald[1160]: Connected to site 192.168.0.252
Oct 16 17:31:28 quad diald[1160]: Running pppd (pid = 1186).
...here goes something wrong
Oct 16 17:32:27 quad diald[1160]: pppd startup timed out. Check your pppd options. Killing pppd.
Oct 16 17:32:27 quad diald[1160]: start sl0: SIOCSIFMETRIC: Operation not supported
Oct 16 17:32:28 quad diald[1160]: start sl0: SIOCADDRT: File exists
Oct 16 17:32:28 quad diald[1160]: start sl0: SIOCADDRT: File exists
Oct 16 17:32:28 quad diald[1160]: child process 1186 terminated with signal 2
Oct 16 17:32:28 quad diald[1160]: start sl0: SIOCSIFMETRIC: Operation not supported
Oct 16 17:32:28 quad diald[1160]: start sl0: SIOCADDRT: File exists
Oct 16 17:32:28 quad diald[1160]: start sl0: SIOCADDRT: File exists
Oct 16 17:32:28 quad diald[1160]: Disconnected. Call duration 60 seconds.
Oct 16 17:32:28 quad diald[1160]: IP transmitted 1664 bytes and received 0 bytes.
Oct 16 17:32:28 quad diald[1160]: Closing /dev/ttyS3
Oct 16 17:32:29 quad diald[1160]: Delaying 300 seconds before clear to dial.
Oct 16 17:32:58 quad diald[1160]: SIGTERM. Termination request received.
Oct 16 17:32:58 quad diald[1160]: Diald is dieing with code 0
Oct 16 17:33:00 quad nscd: 292: short write in cache_addhst: Broken pipe
Oct 16 17:33:03 quad nscd: 291: short write in cache_addhst: Broken pipe
/etc/diald.conf:
mode ppp
accounting-log /var/log/diald.log
fifo /etc/diald/diald.ctl
debug 31
device /dev/ttyS3
connect "/etc/diald/connect"
speed 38400
modem
lock
crtscts
local 192.168.0.251
remote 192.168.0.252
dynamic
defaultroute
redial-backoff-start 3
redial-backoff-limit 300
dial-fail-limit 10
redial-timeout 300
include /usr/lib/diald/standard.filter
mode ppp
accounting-log /var/log/diald.log
fifo /etc/diald/diald.ctl
debug 31
device /dev/ttyS3
connect "/etc/diald/connect"
speed 38400
modem
lock
crtscts
local 192.168.0.251
remote 192.168.0.252
dynamic
defaultroute
redial-backoff-start 3
redial-backoff-limit 300
dial-fail-limit 10
redial-timeout 300
include /usr/lib/diald/standard.filter
/etc/ppp/options:
domain NL.net
debug
